Directory

Check Oracle StorageTek ACSLS

A Nagius plugin to check Oracle StorageTek ACSLS status. Written in BASH and is intended to run on the ACSLS host.

Check OSSEC Agent and Server Status

Shell script to check the status of OSSEC agents and server. This script should be run on the OSSEC server. Alert on disconnected agents by name or by the number of agents no longer connected to the server. Also, provides check for running OSSEC servic ...

Check OSX HD SMART Status

Check the S.M.A.R.T status for a disk on OSX. Return critical upon failing status. Options: -d Specify volume a disk -l List available disks

Check OSX RAID Status

Shell script to check the RAID status for disks on OSX. Returns critical on degraded, failed, or offline disks. Options: -l List full RAID information -c Check RAID status Usage: $0 -c

Check OSX Temperature

Check the temperature sensors on OSX. Requires installation of TemperatureMonitor from www.bresink.com/osx/TemperatureMonitor.html. It checks each sensor temperature against the critical threshold specified on the command line and repots critical if tempe ...

Check Overall System Health

Nagios plugin to check the overall health of a system. Uses SSH to connect to remote server, requires that passwordless login is enabled (SSH Key authentication).

check packeteer

Read measurement data about various network (and traffic) statistics from Packeteer appliances.

Check Paloalto A500

Check Paloalto A500 firewall via SNMP

Check Path Age

This plugin was developed to run under BASH and extends the functionality of the check_file_age plugin with several new options.

Check PDU

Perl script to poll SNMP-enabled UPS devices, namely from Tripp Lite, such as the PDUMH20ATNET.

Check Perfcounter (

Checks a "raw" performance counter.

Check Performance Monitor

Grabs values from Performance Monitor Counter. VBScript, calls typeperf.exe to get results. Code is sloppy, but free to use as needed.

Check pf.conf sync

This check verifies that pf.conf is in sync between two different sources.

Check Philips Hue devices

Plugin to check if a certain Device is conected to a Hue Hub, if there is an update available for the Hub as well as Battery, Temperature, Power Status. More to come...

check physical memory

Check physical memory using shell script. Memory is displayed as a percentage.

Check Pihole Api Plugin

A plugin to extract (almost) all the information from the Pi-hole API.

Check Pineapp

Check Pineapp mail relay via SNMP

Check Ping - with MTR and custom outputs

An extension of a basic ICMP test script idea. The check does fairly boring ICM check of a host. On packet loss it can run a MTR ( http://en.wikipedia.org/wiki/MTR_%28software%29 ) check and email the results to the specified address. (Requires that t ...

Check PIX Failover Status

Checks status of a pair of PIX firewalls in failover. Allows OK state for any valid status, and can notify on change of status (first change only).

Check plugin for Castelle net fax server

Simple shell script to monitor Castelle net fax servers via snmp (snmpget is used)

check pop3 account

check_pop3_account.pl logs into a POP3 or POP3 over SSL (POP3S) account and reports the number of messages found. It can optionally generate alerts based on the number of messages found. Performance data is available in the form of the number of messages ...

Check Postfix

Check Postfix Mailqueue 2

Nagios script to get the value of active, deferred, corrupt, hold and bounced mails in postfix and generate warning or critical notify like you want.

Check postgres replication

Check Postgresql replication, tested on 9.2 and 9.6 it connects to master and standby and reports in case replication is walking behind. It reports how many bytes or MB the replication is behind From and idea of Jonny Morano, completely rewritten by ...

Check PostgreSQL Service

Check pgsql service making a query.

Check PowerConnect Switch

Supports a wide variety of models tested with 33xx,34xx, 35xx, 53xx, 54xx, 60xx, 62xx, 80xx, N20xx, N30xx, N40xx

Check Powernet PDU load

Performs a per-bank load check (based on load status or real load values) on a Powernet MIB (APC) compliant PDU.

Check PPTP User (by Nestor@Toronto)

Check how many PPTP/PPP user are logged into VPN right now and list all user. It sent an alert when more than number of user from input. Script were written in BASH, tested on CentOS 6.X, Nagios 3.X

Check Printer Queue State

Check printer queue status (using enq) on AIX. If the queue matches the given status then return OK.

Check printer toner (HP)

The script for verifying the toner level for the HP printers which have issues with SNMP. I have the HP DeskJet 2630 and the web interface of it is passwordless (maybe I'll add auth support in the future, as for now - nope). The script checks if the print ...

Check Printer Toner Cartridge Level via SNMP with local...

Nagios Plugin to check the remaining pages (toner) of a printer SNMPv1 also working if the printer is switched off or just just from time to time.

Check Printer via SNMP

Checks the status of a Printer via SNMP. [ Obviously it needs to be a network printer :) ]

Check Process

Check_process is a plugin that monitors if a defined process is running.

Check Process by PID or PID file on Solaris 10

This is designed to monitor a specific process by either PID number or a PID file created when the process was started. It calculates a percentage of memory being used by using prstat and dividing RSS/Size. ./check_pid -n 19523 -w 85 -c 95 OK STATE ...

Check Process Resources

This check can be used to monitor processes either on the Nagios server or on other Linux machines when used in conjunction with check_by_ssh.

Check Process Runtime

Check the runtime of process on a windows machine

Check process runtime

A script that checks, if a given process has exceeded a defined runtime in seconds

check processes

A simple shell script for nagios to check the number of processes running on a target system

Check Processes and Ports

A script that checks if processes and TCP ports are up. Tested on Redhat Enterprise Linux 3,4, Fedora 4,5,6, Solaris 6,7,8,9 and HP-UX 11.11,11.23

check processes combined

This plugin check cpu / ram or both for one or more process for all,one or few user. The data is put on graphs Usage: check_process -C -p [-w ] [-c ] [-n nickname] ] [-u ] [-o ]

Check Processes status via SNMP

Plugin written in bash

Check Processes via SNMP

Check Processes via SNMP. Plugin uses UCD SNMP MIB (1.3.6.1.4.1.2021).

Check Processor, Disk and Memory - TK

Check Profiler

The purpose of the Check Profiler is to allow you to look at how long checks take to execute on your Nagios XI host. This can be handy to get birds eye view of all your checks. This component requires the "Box293 Common User Account" component, this is ...

Check project quota on xfs filesystem

This simple written plugin checks the project quota on xfs filesystems. If you reach the softlimit you get the warning message and the critical message when you reach the hardlimit. xfs-tools are needed. Additional infomations in the plugin file

Check Proxy with Authentication

This BASH script uses wget and its parameters to accept a proxy server IP plus credentials to access the website passed to it. It uses spider functionality to access the website and confirm that the correct site is accessed. Block pages are recognized as

check ps cpu - simple bash script

check Puppet Agent

This simple plugin checks if puppet agent is up and running.

Check QNAP Disk ^Popular

This plugin checks all disk slots on your QNAP NAS host with snmp and will output OK, WARNING or CRITICAL if the resulting number is over the specified thresholds. Enable on your QNAP NAS the snmpd (see the QNAP adminguide too).

Check Quantum DXi Series

Quantum DXi Series check for Nagios / Nagios XI. The shell script will get the system and deduplication info from DXi systems. Performance data are also included. DXi must have firmware 2.x to get data. 1.2 Check deduplication watermarks are not ...