Directory

Check Apache Balancer Member

Checks the status of balancer workers through the balancer manager page. The check goes critical if there are no enabled/valid workers or if there are workers in the Err state.

Check Apache Load

This plugin checks the CPU percentage used by the Apache process.

Check Apache Requests

This plugin checks the number of requests per second handled by the apache process.

Check Apache Slow Requests

Plugin removed and no longer supported !

check apache website

This plugin checks the amount of access to your server since the past X minutes activity using apache log file. This plugin is able to select website or Ip source to check/ignore Here is the different options -i, --delay=STRING how many access ...

Check APC EMS Device

Shell script that uses snmpget to monitor an APC Environmental Monitoring Device.

check APC Galaxy status

This plugins monitors APC Galaxy.

Check APC PowerChute battery replace status

Simple bash script to check battery replace status via snmp from powerchute

Check APC UPS

This is a fork of the original check_apc.pl from layerthree (https://exchange.nagios.org/directory/Plugins/Hardware/UPS/APC/check_apc-2Epl/details) It extends the capabilities and it was modeled to monitor a SYMMETRA APC UPS, however it can support a wid ...

Check APC UPS via SNMP when connected to Synology DSM v...

Nagios Plugin to check the current status of an APC Back UPS (Battery level and Load)

Check AQL Credit Balance

Get the balance alert for your AQL Credit Balance using AQL HTTP Gateway.

Check Arcserve Backup Jobs

This plugin checks the status of Arcserve backup jobs and reports if any have failed.

check areca

Very simple script which checks volume status and fan speed (need cli32 provided from areca).

check asga fiber links

Check Asterisk

Asterisk Check

Check Asterisk Calls

Monitoring script check simultaneous calls. Tested in Asterisk 1.8 and Centos 5.7 ./check_asterisk_calls.sh [XX] [YY] XX warning value YY critical value

Check Asterisk Conf Bridge

Monitoring Script for check conference using ConfBridge, Asterisk app.

Check Asterisk Meetme

Monitoring Script conference rooms Meetme the Asterisk PBX. Developed in Bash, tested in Asterisk 1.4, 1.6 and 1.8, with Linux CentOS 5.5 and higher. Delivery value of the amount of room in use and the number of user in the rooms.

Check Asterisk's Channels duration

This plugin checks Asterisk channels for defined duration and hangs up the channel if duration exceeded from the critical value. More plugins and latest commits can be accessed at https://github.com/azharkhn/nagios-plugins

CHeck autoextend V2

check les DBF en autoextend

Check Automatic Services for Windows (Advanced Nagios P...

Checks all automatic Windows services are running. Accepts exclusions. Written Natively to work on any modern Windows system and can be used with any standard Nagios remote execution method.

Check Automatic Windows Services

Powershell script to check all automatic services are running and returns Nagios output and code. It tries to start services stopped before sending a critical state.

Check Available Updates

A plugin used to check for missing updates for Windows. The plugin is a VBScript which is intended to be used by the check_nrpe plugin on the Nagios server and NRPE for Windows or NSClient++ on the Windows side.

Check AVG database date

Check date of AVG database via socket connect

Check AVTECH Room alert

Check AVTECH Room alert devices tempeture via SNMP

Check AWS CloudWatch Alarms

check-cloudwatch is a simple CLI program, utilising the AWS SDK, to check the status of a specified CloudWatch alarm.

Check Azure Active Directory Connect

Check Azure Active Directory Connect status and last replication.

Check Backup Exec / Veritas (2012-2019) Jobs

PowerShell script to check Backup Exec last scheduled job status and returns Nagios performance output and exit code.

Check Backup Exec Jobs Plugin

SYNOPSIS This script will connect to Symantec BackupExec server and using PowerShell, it will return information about the backup jobs: SYNTAX .check_backupexec_jobs.ps1 [[-Name] ] [[-Period] ] [] PARAMETERS -Name Name o ...

Check Backup Exec Veritas Services

Check BackupExec Services with the "check_nt" plugin. It checks Service BackupExecAgentBrowser,BackupExecDeviceMediaService,BackupExecJobEngine and BackupExecRPCService

Check BackupExec Backup Size

Script to Parse Backup Exec logfile .XML (gets based on today’s date) Calculates how much data was written to Tape and total supposed backup size. The supposed backup size depends, in our case we backup all Disks but the C: and so I calculated in a Dyn ...

Check Bandwidth for PPTP/PPP VPN (by Nestor@Toronto)

This script will check how many PPTP user is currently logged and check each users' speed, it will send out alert if any user is over usage from input value. Check IO Wait for Linux. Return IO wait in percentage Script were written in BASH, tested o ...

Check Bandwidth, with iftop (by Nestor@Toronto)

Using iftop to check current bandwidth. Script were written in BASH, tested on CentOS 6.X, Nagios 3.X # Dependency: iftop

Check Bandwidth, with iftop, for single interface (by N...

Using iftop to check current bandwidth for ONLY one NIC. Script were written in BASH, tested on CentOS 6.X, Nagios 3.X # Dependency: iftop

Check Bandwidth, with vnstat (by Nestor@Toronto)

Using vnstat to check current bandwidth. vnstat will provide slightly faster checking but it can only do per NIC/interface, instead of over all bandwidth. Script were written in BASH, tested on CentOS 6.X, Nagios 3.X # Dependency: vnstat

Check Barracuda Webfilter Status

Check active TCP connection and Throughput (% vs the total system capacity) of a Barracuda Webfilter. Tested with Webfilter 410 v6

Check basic authentication

This plugin is used to authenticate against a web page using basic authentication and to check that the web site is allowing user logins. It can also check for a string once authenticated to verify the page is as expected and produce timing information fo ...

check beancounters

A Nagios-plugin to monitor fail-counts of OpenVZ containers.

Check Bestlink UPS

This is a script to monitor BESTLink Web/SNMP adapters. These are old adapters, so there might not be many sites that have them in use, but our site has quite a few, so this script has come in handy for monitoring them.

check BGP neighbor JunOS

Perl script to check BGP neighbor states for JunOS devices via SNMP. If BGP session not in state established a CRITICAL alarm occurs. Performace data for in/out BGP updates/ message counters are included

Check BigIP F5 bandwidth

I just found an old Nagios plugin of mine, it was sitting in a directory, taking dust. As usual, I’m not a programmer, so I just do quick and dirty tricks to get what I need, so here it is the plugin in all it’s bash glory. The plugin is comment ...

Check BigIP F5 load

As for the previous F5 plugin, I just found this old Nagios plugin of mine, sitting in a directory, taking dust. As usual, I’m not a programmer, so I just do quick and dirty tricks to get what I need, so here it is the plugin in all it’s bash glory ...

check bloating process

This plugin uses linear regression algorithm to determine if the memory usage of a given process(by name or by pid) is growing up on time.

Check BlueCoat Proxy Disk

This plugin allow to check the snmpdiskstate in your bluecoat proxy. The archive contained the README and a pnp4nagios template.

Check Brocade Hardware Health

Checks Brocade SAN switches for FAN, Power Supply and Temperature status through SNMP.

Check Burp Backup

A simple bash script to check the age of a BURP backup, some statistics (News, Deleted, Changes, ...) and warnings. Generate some perfdatas. We moved to github : https://github.com/pierre-guillot/check_burp_backup

Check Cassandra status and heap memory utilization

Monitors Cassandra status and heap memory utilization.

Check Centrify

A plugin to check the Centrify service running on a local machine. It will report CPU and Memory of the adclient process, the zone, the DC and the version. -- Update 07/04/2016, new version of script uploaded which now accepts command line args and al ...

Check cisco 3750 stack status

Check the status of a Cisco Catalyst 3750,3650,3850 stack via SNMP

Check Cisco AP Number

Check the number of AP registered on a Cisco Wireless Controller. If the number of AP isn't what expected, it returns a WARNING state.