Directory

check pop3 account

check_pop3_account.pl logs into a POP3 or POP3 over SSL (POP3S) account and reports the number of messages found. It can optionally generate alerts based on the number of messages found. Performance data is available in the form of the number of messages ...

Check Postfix

Check Postfix Mailqueue 2

Nagios script to get the value of active, deferred, corrupt, hold and bounced mails in postfix and generate warning or critical notify like you want.

Check postgres replication

Check Postgresql replication, tested on 9.2 and 9.6 it connects to master and standby and reports in case replication is walking behind. It reports how many bytes or MB the replication is behind From and idea of Jonny Morano, completely rewritten by ...

Check PostgreSQL Service

Check pgsql service making a query.

Check PowerConnect Switch

Supports a wide variety of models tested with 33xx,34xx, 35xx, 53xx, 54xx, 60xx, 62xx, 80xx, N20xx, N30xx, N40xx

Check Powernet PDU load

Performs a per-bank load check (based on load status or real load values) on a Powernet MIB (APC) compliant PDU.

Check PPTP User (by Nestor@Toronto)

Check how many PPTP/PPP user are logged into VPN right now and list all user. It sent an alert when more than number of user from input. Script were written in BASH, tested on CentOS 6.X, Nagios 3.X

Check Printer Queue State

Check printer queue status (using enq) on AIX. If the queue matches the given status then return OK.

Check printer toner (HP)

The script for verifying the toner level for the HP printers which have issues with SNMP. I have the HP DeskJet 2630 and the web interface of it is passwordless (maybe I'll add auth support in the future, as for now - nope). The script checks if the print ...

Check Printer Toner Cartridge Level via SNMP with local...

Nagios Plugin to check the remaining pages (toner) of a printer SNMPv1 also working if the printer is switched off or just just from time to time.

Check Printer via SNMP

Checks the status of a Printer via SNMP. [ Obviously it needs to be a network printer :) ]

Check Process

Check_process is a plugin that monitors if a defined process is running.

Check Process by PID or PID file on Solaris 10

This is designed to monitor a specific process by either PID number or a PID file created when the process was started. It calculates a percentage of memory being used by using prstat and dividing RSS/Size. ./check_pid -n 19523 -w 85 -c 95 OK STATE ...

Check Process Resources

This check can be used to monitor processes either on the Nagios server or on other Linux machines when used in conjunction with check_by_ssh.

Check Process Runtime

Check the runtime of process on a windows machine

Check process runtime

A script that checks, if a given process has exceeded a defined runtime in seconds

check processes

A simple shell script for nagios to check the number of processes running on a target system

Check Processes and Ports

A script that checks if processes and TCP ports are up. Tested on Redhat Enterprise Linux 3,4, Fedora 4,5,6, Solaris 6,7,8,9 and HP-UX 11.11,11.23

check processes combined

This plugin check cpu / ram or both for one or more process for all,one or few user. The data is put on graphs Usage: check_process -C -p [-w ] [-c ] [-n nickname] ] [-u ] [-o ]

Check Processes status via SNMP

Plugin written in bash

Check Processes via SNMP

Check Processes via SNMP. Plugin uses UCD SNMP MIB (1.3.6.1.4.1.2021).

Check Processor, Disk and Memory - TK

Check Profiler

The purpose of the Check Profiler is to allow you to look at how long checks take to execute on your Nagios XI host. This can be handy to get birds eye view of all your checks. This component requires the "Box293 Common User Account" component, this ...

Check project quota on xfs filesystem

This simple written plugin checks the project quota on xfs filesystems. If you reach the softlimit you get the warning message and the critical message when you reach the hardlimit. xfs-tools are needed. Additional infomations in the plugin file

Check Proxy with Authentication

This BASH script uses wget and its parameters to accept a proxy server IP plus credentials to access the website passed to it. It uses spider functionality to access the website and confirm that the correct site is accessed. Block pages are recognized as

check ps cpu - simple bash script

check Puppet Agent

This simple plugin checks if puppet agent is up and running.

Check QNAP Disk ^Popular

This plugin checks all disk slots on your QNAP NAS host with snmp and will output OK, WARNING or CRITICAL if the resulting number is over the specified thresholds. Enable on your QNAP NAS the snmpd (see the QNAP adminguide too).

Check Quantum DXi Series

Quantum DXi Series check for Nagios / Nagios XI. The shell script will get the system and deduplication info from DXi systems. Performance data are also included. DXi must have firmware 2.x to get data. 1.2 Check deduplication watermarks are not ...

Check Quantum Scalar i2000 / i6000

Perl plugin to check the status of the subsystems on a Adic/Quantum Scalar i2000/i6000 tape library. Also performance data now available.

Check Quantum Scalar i40 / i80

The script check the status of QUANTUM Scalar i40/i80 Tapelibraries

Check Queued AIR Replications

This is just a simple script that uses Net::SSH::Perl to ssh to a NetBackup server running linux. It's an adaptation of a script one of my co-workers came up with. This isn't fancy, but I have it working in my environment. I wrote it to work with the Sy ...

Check Queued Emails Requests

Checking Current queue of Postfix + Perfdata based on mailq command

check radius

radius autentication plugin for nagios.

Check Radius

This scripts is intended to be used as a Nagios plugin to check the different states of our Freeradius Server even if the freeradius is up and runing it checks if the Freeradius can handle requests using radclient.

check radius adv

This plugin is based on the check_radius (radauth.c by Matt Miller). Basicly it will check authentication against radius server.

Check RAID devices on HP DL320 G5 - windows

A perl-based plugin to check RAID devices on HP DL320 G5 servers running Windows. It requires Hrconf

Check Ram

Check_ram is a plugin that will return the amount of free physical memory.

Check RAM usage as a percentage

Queries via snmp and returns the memory usage as a percentage.

Check Raspberry Pi Temperature

This bash script reports on and checks CPU and GPU temperature of the local Rapsberry Pi single-board computer, and warns if it exceeds the thresholds. The actual code is managed in the following GitHub rebository - please use the Issue Tracker to ask ...

Check redundant switch

A based Perl script that check a redundant switch available.

Check Regex exists in file

Nagios plugin bash script for checking for presence of a regex in a file. Usage: check_regex_in_file.sh -r REGEX -f FILE Where: REGEX= Grep Extended Regex FILE= Full file path where Regex should exist

Check Relayd

Comprehensive perl relayd checker.

Check relayd status

This script checks the OpenBSD relayd. It returns a warning if not all hosts in a table are up and a critical if a table and/or redirect is totally down.

check remote files age in minutes

checks a directory on a remote system (via rsh or ssh) and returns a warning if a specified amount of files is found which is older than x minutes.

Check Remote Oracle through Ssh (No need to install Ora...

New version 0.3 to fetch real undo usage ("UNEXPIRED SEGMENTS") (New version 0.2 with active sessions count, ASM diskgroups and hard/soft parsing percentage ratios check) This is the original official check_oracle nagios plugin, developed by latigid ...

check remote unix scripts

Various scripts to check disk, load, uptime, metastat, and other stuff via ssh or rsh on remote unix system. Developed on Solaris to check remote solaris, hp-ux and linux systems.

Check Repadmin

Checks the output of repadmin /showreps for errors.

Check Replication

Update an object and a file in ADS with the script "be_the_one.pl".