Directory

check_pycurl3

A nagios plugin to check HTTP requests which allows you to run a series of checks, retaining some state information (so you can for example login to a site & keep session cookie). Written in python using pycurl. Licensed under GPL v3 Download the latest ...

check_qmailq

Check qmail queue.

check_qmail_processed

Nagios agent to check how many e-mail are processed by qmail.

check_qnap

This plugin sends SNMP queries to a QNAP NAS and checks the cpu, HDD status, system temperature, HDD temperature. Version 1.00 first Version. Version 1.03 Version 1.40 Changes reports Performance Data runs faster some new checks (LUN, Power, .. ...

check_qnap2

Based on version 1.03 from: http://exchange.nagios.org/directory/Plugins/Hardware/Storage-Systems/Others/check_qnap/details Fixed minor errors and did some cleanup of the status information. Monitoring of: - Temperature system - Temperature disks ...

check_qnap3.sh

Nagios Check for NAS QNAP via SNMP and bash script. based on check_qnap and check_qnap2

check_qnapraid

nagios plugin to check the status of the qnap appliances hardware.

check_qnap_all_models

check_qnap for all models with performancedata

Check_qnap_cpumem

This plugin checks CPU usage and Memory usage (total, used, free) of the most QNAP devices via SNMP.

Check_qnap_temp

Check CPU / System / HDs Temperatures of QNAP devices via SNMP.

check_qnap_temps

Yet another Nagios plugin for checking CPU, SYS, and HDD temperatures on QNAP devices via SNMP

check_qpage

Check state of qpage service and queue.

check_quagga_bgp.sh

Plugin that monitors bgp sessions and warns when the total amount of established sessions drops below a threshold. Plugin also warns when prefixes for each established session drops below a threshold. It also outputs graphing data for prefixes for each ...

check_quagga_bgpd

Nagios plugin to monitor the quagga bgpd daemon

check_quake

This is a Nagios plugin to monitor game servers. The plugin uses qstat to do all the queries. All games that are supported by qstat works with check_quake. The plugin complies with the Nagios Plugin Development Guidelines. It has some basic sanity che ...

check_quickbooks

This plugin will check the Quickbooks 2011 server to see if it's running. My QB installation uses port 55343, but if your install uses a different port (each QB release uses a different port or port range) then just change the "port" variable in the file ...

check_quota

checks a users' quota

check_quota.pl

This scripts allows you to check the quota for a specific user, a specific group or all quota users (based on the repquota output), or the dirquota output for directories in Windows systems. Provides perfdata if requested.

check_rabbitmq

Nagios Plugin for RabbitMQ

check_rac

Nagios plug-in for Oracle rac (11g and above) This plugin is written with 2 main concerns: 1: works with Linux / Windows and regardless of the language (ENG / FR / etc.) 2: use exclusively the new crsctl command (11g-12c) and not the old deprecated ...

check_radius.pl

Plugin written in Perl using radclient and Status-Server packet from FreeRADIUS project. Performance data about elapsed time executing the query.

check_radius_ih

This plugin is based on the check_radius_adv (by Gerd.Mueller). Now attributes can be introduced by command line

check_raduis_radpwtst.sh

Check radius using radpwtst utility (used by Radiator) Requires the radpwtst utility be located in /usr/local/nagios/libexec/radius/ This also typically requires the Radius Perl Modules be located there as well.

check_raid

Check all RAID volumes (hardware and software) that can be identified. Probably compatible with all Nagios derivatives, just haven't tested on them Download latest version from project homepage.

check_raidctl

Checks the raid status for systems with internal raid controllers.

check_raid_amrstat - Dell AMR PERC4 FreeBSD

Checks the status of PERC4 or similar MegaRAID SCSI RAID controllers under FreeBSD.

check_raid_b110i.pl

Just executes "dmraid -s" and see if status is "ok" or "inconsistent".

check_raid_dl320

Check Embedded Raid on DL320g5. This version use vbs and you can use it without installing perl (needed for the Unix-ported version).

check_raid_gmirror for FreeBSD Software RAID

Check the status of geom(4) gmirror(8) software RAID volumes on FreeBSD 5x and 6x.

check_raid_megarc AMI LSI Dell PowerEdge PERC4 SCSI RAI...

Check American Megatrends / LSI Logic / Dell PERC4 SCSI Hardware RAID Controller under FreeBSD by parsing the output of ports/sysutils/megarc

check_ram

Basic monitor to check percentage of used physical RAM.

Check_Ram on Linux 32-bit and 64-bit systems

Checks the ram usage on the local machine, good for remote checks using nrpe. Works on 32-bit and 64-bit Linux systems.

check_ram.sh

This script outputs the percentage of free memory RAM and alerts (warning/critical) according to the specified thresholds.

check_ramos.pl

nagios plugin for CONTEG RAMOS temperature/humidity monitors. Parses the xml values. Tested with RAMOS Mini C temperature & humidity sensors.

check_rancher2

This is a monitoring plugin to check container infrastructures managed with Rancher 2.x. It uses Rancher 2's API to monitor states of clusters, workloads or pods. Latest plugin release and documentation can be found here: https://www.claudiokuenzler.com ...

check_RANCID_backup

It is a simple script for monitoring of the backup file will be made ??with rancid

check_ranger_stats.pl (Advanced Nagios Plugins Collecti...

Checks Ranger stats for number of policies and repositories via the Rest API

check_raritan_pdu.pl

Checks Raritan Dominion PX series pdu's for load/outlet status. Based on check_apc_pdu by Marius Rieder.

check_raspberry_shake

Check the status of a Raspberry Shake device

check_raspberry_temp

A small plugin to check the cpu temperature of your raspberry pi.

check_rasp_temp

Nagios-Plugin to check the CPU temperature of a Raspberry Pi

check_rate

A simple perl plugin that allows nagios to check the rate of change of the output of any command as long as it's a number, e.g. filesystem usage growth, network traffic spikes, dns queries spikes, etc It uses a sqlite3 database to store the last value.

check_rbl

check_rbl is a Nagios plugin to check if an SMTP server is blacklisted

check_rbl.pl

Check is the host is on any of the public email blacklists.

check_rcs

This is a Perl plugin for Nagios to check specified Nagios config files and exit with critical status (2) if any have been checked longer than 60 minutes ago.

check_rdiff

This plugin checks the health of an rdiff-backup respository. Whether its finished or not, how large it was etc.

check_rds_cals

check available RDS Client Access Licenses.

check_readynas - Netgear ReadyNAS 2100 Nagios Plugin

check_readynasos6 - plugin for Netgear Readynas OS 6

Based on egalstad's work: https://exchange.nagios.org/directory/Plugins/Hardware/Storage-Systems/SAN-and-NAS/check_readynas--2D-Netgear-ReadyNAS-2100-Nagios-Plugin/details Instructions are the same, but you need to use READYNASOS-MIB.

check_readynas_hd.pl

This plugin checks the first partition on a "Netgear ReadyNAS" using SNMP. snmpwalk is required! You need a MiB-File from the netgrear Page.