Category: Environmental

Check Dell server power supplies status

Plugin specificly for purposes of checking status of dell server power pupplies via snmp (so you must have openmanage installed on the server)

Check fans on FuSi Server

This Perl-script checks the status of fans (cooling devices) in server from Fujitsu Siemens (RX100, ...).

check fsc hardware with serverview

Gets hardware alerts from a FSC Primergy server through SNMP (environment, powersupply, massstorage, systemboard, deployment).

check-hddtemp

check hdd's temperature through hddtemp

check-mt-volt

This plugin checks voltage readings of MikroTik router(with voltage sensor) via SNMP.

check_apcaccess for Windows

check_capteurs

read sensors with translation mecanism.

check_dell_sensors

Nagios plugin for checking the status of Dell chassis sensors using 'omreport'

check_entPhySensorValue

Checks or list the entitySensorMIB. I use it to check temperature on proocurve switches. ./check_entPhySensorValue.pl -H myswitch -s 11 -w 25 -c 30 -p check_entPhySensor OK - Sensor: 11, Chassis Temperature is 22 (C)| Chassis-Temperature=22C

check_fsc - plugin for checking Fujitsu-Siemens servers...

check_fsc.pl checks Fujitsu Siemens servers via SNMP. You can also exclude subsystems from the checks and define warning and critical thresholds for fan speeds. There's a spec file in the archive if you want to build an RPM.

check_hddtemp.sh

Monitor ATA and S-ATA drive temperature.

check_hp

Check CPUs, fans, array controllers, logical / physical drives, temperature and power supplies on your Proliant servers or blade systems through SNMP. As of version 2.20 you can use this plugin to retrieve performance data for Smart Array CPUs.

check_ilo2_health

Check hardware health of HP Proliant Servers by querying the iLO2/3/4/5 Management Controller.

Check_IPMI Plugin

Check IPMI Vales from the BMC on the Dell PowerEdge (or DRAC5) or other IPMI agent.

check_ipmi.pl - plugin for checking SUN hardware via IP...

check_ipmi.pl checks SUN Servers with ILOM/IPMI interface and reports the FAN/Temp ... values as performance data.

check_ipmi_sensors PERL Plugin

Check status of temperature sensors and fans with ipmi.

check_k8temp

Check the temperature of an AMD K8 (e.g Athlon, Sempron) CPU from a Linux machine running lm_sensors.

check_laptop_battery.vbs

Check the charge in a laptop battery

check_lm_sensors

check_lm_sensors is a Nagios plugin to monitor the values of on board sensors and hard disk temperatures on Linux systems

check_lm_sensors-improved

This plugin checks hardware status using the lm_sensors package.

check_mbmon

Hardware monitor plug in useful for system without lmsensors, like FreeBSD, NetBSD, OpenBSD

check_mt_voltage

Plugin for check MikroTik voltage

check_nec_fan

This plugin test the state of fans of NEC/BULL servers.SNMP agent ESMPRO must be installed and correctly configured on the monitored server.

check_ohm_temperatures

A PowerShell script used by NSClient++ to check the temperatures on a host running Windows. NSClient++ can then be called by Nagios to run this script. The script uses OpenHardwareMonitor.org to read the temperatures.

Check_qnap_temp

Check CPU / System / HDs Temperatures of QNAP devices via SNMP.

check_sensors

Improved version of the official sensors plugin.

check_smarttemp.sh

This plugin allows you to check your hdds' S.M.A.R.T. temperatures.

check_snmp_hp_fan

This plugin check the thermal and fan state of HP servers running CPQ SNMP extension.

check_snmp_IBM_fan_rsa

This plugin checks all fans presented by the rsa card.

check_strings

Check value for specified string in a web page, and sends alerts for warning and critical threshold. I used it to monitor the datacenter's temperature and humidity.

check_sun_hardware

Script to check state of cpu, fans, temperature and voltage sensors on SUN Fire v210, v240 and v440 servers.

check_systemp

simple perl Script for reading temperatures form /sys/class/thermal/

check_temp_hum_th2e

The script, check_temp_hum_th2e allows the user to monitor the temperature and humidity of TH2E sensor devices. The data will be fetched by the script via XML. After the script has parsed the XML data, the script will return the appropriate values. Please ...

check_watchptHumid

Plugin to check the humidity from Digi Watchport sensors. Linux and Windows versions.

check_watchptTemp

Plugin to check the temperature from Digi Watchport sensors. Linux and Windows versions.

check_watchptWater

This Nagios plugin checks whether a Digi Watchport water sensor detects water. Written in Python.

check_xserve

This python script utilizes Marcel Bresink's Hardware Monitor software to check the values of the sensors in Apple hardware such as the Apple Xserve.

Compaq-HP Proliant Server and Blade Checks (SNMP)

Nagios check to recursively scan via SNMP on HP BladeSystem the Fan and power supplies. In addition also the overall system status is retrieved.

Compaq-HP Proliant Server and Blade Checks (SNMP)

Check CPUs, fans, array controllers, logical / physical drives, temperature and power supplies on your Proliant servers or blade systems through SNMP.

Dell BMC IPMI Checks

This is a check plugin for the Dell BMC IPMI interface. This has been tested and developed with the PowerEdge 2950.

Dell OpenManage Chassis

Checks the chassis hardware (fans, temperatures, voltages et al) of Dell servers using OpenManage.

DELL SNMP Temp

Checks CPU Temp of DELL Servers with SNMP from Linux machine.

hpasmcli temp check

HP DL-360-G4 Servers with HPASMCLI installed on RHES4. RSH hpasmcli and run SHOW TEMP with SYSTEM BD output to Nagios.

Plugin to Check SpeedFan Metrics via SpeedFan HTTP Agen...

Nagios plugin to make SpeedFan metrics available via speedfanhttpagent URL (XML format).

Plugin to check Sun's XSCF (local service)

The script checks Sun's eXtended System Control Facility (used on M4000/M5000/M8000/M9000 series)

RSA & RSA II FAN SPEED

This plugin checks for fan speed on IBM x series servers with RSA or RSA II interface. It is based on check_rsa_fan. It accepts hostname, community and warning threshold (critical is only when fan speed is equal to 0). It has two versions: one for 4 fans ...

RSA & RSA II TEMPERATURE

This plugin checks for temperature on IBM x series servers with RSA or RSA II interface. It is based on check_rsa_temp. It accepts hostname, community and warning and critical threshold. It shows CPU and Ambient temperature It has three versions: one for ...

sgichk_alaxala_chassis.pl

Plugin to monitor chassis stats of Alaxala-based switches (like the NEC switches).

sgichk_cisco_chassis

Check chassis health of most cisco devices (fans, power supplies, etc)

sgichk_entity_sensors

A plugin for checking all the sensors of a device that supports the "Entity" MIB such as Arista switches.