Directory

check_cas_auth

Nagios NRPE check_cas plugin

check_catalyst_fans

This script monitors the fan status of a Cisco catalyst via SNMP.

check_catalyst_flash

This script monitors the flash status of a Cisco catalyst via SNMP.

check_catalyst_load

This script monitors the load of a Cisco catalyst via SNMP.

check_catalyst_mem

This script monitors the memory of a Cisco catalyst via SNMP.

check_catalyst_temp

This script monitors the temperature of a Cisco catalyst via SNMP.

check_cciss - HP and Compaq Smart Array Hardware status

HP/HPE Smart Array Hardware status plugin for Nagios 1.x/2.x/3.x

check_cdpfdp

Plugin to check CDP or FDP neighbour table. This plug requires you to have installed libsnmp-info from http://snmp-info.sourceforge.net/ and the necessary snmp MIB files.

check_cdu - Monitor Server Technology Cabinet Distribut...

A Nagios plugin which has extensive and dynamic monitoring capabilities to monitor Server Technology (ServerTech) Cabinet Distribution Units (CDUs). Monitor nearly any metric that is provided from a CDU. Chain as many or as few options together to create ...

check_ceilometer

Check Ceilometer Services

check_cert

This plugin makes an SSL/TLS connection to the specified server/port, validates the cert, and warns/errors on the number of days until the cert expires. It can be set to check an RSA or ECDSA cert, and can check some types of connections using STARTTLS.

check_certificates.pl

Check expiration and/or validity of SSL/x509 certificates. Supports STARTTLS and check through a proxy server.

check_cert_signing_algorithm_secure

This check connects to a specified host:port with OpenSSL to determine if the signing algorithm used on the server certificate is secure.

check_cfengine_lastseen

# This is a passive nagios checker for detecting if cf-agents # have gone AWOL (Absent WithOut Leave) from the cf-server(s). # # It reads a file with hostnames (FQDN) that we care about # being in touch, and needs the FQDN of the nagios server and the ...

check_cft_listcat

Nagios compatible plugin to check CFT catalog size CFT (Cross File Transfer) is a software published by Axway that allows secure file transfers accros multiple clients/organisations. When using CFT, you have to make sure that the catalog (the intern ...

check_chassis_brocade.pl

This script polls a Brocade / Foundry switch and checks and generates alerts on the following items: - a warning if the device was recently rebooted; - a warning / critical if any found temperature sensors are in a non-normal state; - a warning / cri ...

check_checkrestart

This is a Nagios plugin to check if any processes are still using old versions of updated libraries. I needs check_restart from debian-goodies. Debian only!

check_chkrootkit

Scan for intrusions and rootkits with chkrootkit.

check_chrono

This check is based on Jorge Schrauwen's check_connections. It checks the Database-Connections to the Database of a host runnig Agfa Healthcare's CHRONO Task (OpenMed) With this check you can monitor if CHRONO is still running as if it breaks away t ...

check_chrony

Checks NTP and/or PTP offset to reference. E.g.: $ ./check_chrony -w 1 -c 2 OK: Time offset of +0.000005065 seconds to reference. | offset=+0.000005065s;1;2 Documentation etc.: https://github.com/Decstasy/check_chrony

check_cinder

Check Cinder Services

check_cisco_ace

This Nagios Plugin checks the state of ServerFarm or Relaserver on Cisco ACE via SNMP Need CISCO-SLB-HEALTH-MON-MIB and CISCO-ENHANCED-SLB-MIB for work usage: $0 -h -c -f -r -e -v OPTIONS: -h Hostname -c SNMP comunity ...

check_cisco_ace_serverfarm

This Nagios Plugin checks the state of ServerFarm on Cisco ACE via SNMP Need CISCO-SLB-HEALTH-MON-MIB for work Usage: $0 -h -c -f -v This is my first submitted Script. If you have some inprovements i would be happy to read them. Davide

check_cisco_aironet_clients

A simple plugin to check connected clients to an Aironet device. Usage: check_cisco_aironet_clients.pl -H -U -P [ -I ] [ -w -c ]

check_cisco_ap_temp

check_cisco_bgp

This is a Nagios Plugin destined to check BGP peer availability and session state on Cisco devices

Check_Cisco_Config

2013-9-26 - Updated to version .3 This update should make the script work on newer Linux and Unix TFTP servers that require an existing file to exist before accepting an incoming file. The script now touches the file name to create an empty file so that t ...

check_cisco_cpu

This is a Nagios Plugin destined to check CPU utilization on Cisco devices.

check_cisco_cras_sessions

Checks the number of active VPN sessions on a Cisco Remote Access Server (Cisco ASA firewalls) supporting the ciscoRemoteAccessMonitorMIB MIB

check_cisco_envmon

check_cisco_envmon script that uses CISCO-ENVMON-MIB (ePN compliant)

check_cisco_envmon (YAML)

It checks the components hardware status and their functional value levels in CISCO-ENVMON MIB compliant Cisco devices

check_cisco_errors.pl

Based on check_dot3.pl (which never seemed to work as written). I decided to use Net::SNMP::Interfaces::Details to get InErrors and OutErrors instead. It also requires the precise interface name (such as, "FastEthernet0/1").

check_cisco_fan

This is a script to monitor FAN on Cisco Catalyst switches via SNMP.

check_cisco_free_interfaces

Count the number of free interfaces more than X days on a cisco switch

check_cisco_ifs - via SSH or Telnet

This plugin allows monitoring of 1 or more interfaces of Cisco equipments. Supports both SSH and Telnet. It was tested on 4500 switches but should work properly on any IOS based equipment. The plugin will return 0 [OK] if all given I/Fs are up, 1 [WAR ...

check_cisco_interfaces

This is a Nagios Plugin destined to check the state and bandwidth of specified interface of Cisco device via SNMP.

check_cisco_ipsla

This check will probe for Cisco IP SLAs. (Tested on IOS 12.4T release)

check_cisco_license_date

Nagios check in python review the license expiration date of a Cisco CSR1000V using snmp.

check_cisco_mem

This is a Nagios Plugin destined to check RAM usage on Cisco devices.

check_cisco_nexus_cpu

This plug-in gives CPU usage (in %) on 5 seconds, 1 minute and 5 minutes average. Performance data are also given. It has been successfully tested on Cisco Nexus 7000 and 5000.

check_cisco_nexus_hardware

This plug-in checks a collection of sensors included on Cisco Nexus. It checks voltage, temperature, fans and PSU. Performance data are also given.

check_cisco_nexus_mem

This plug-in gives memory usage (free and used) of Cisco Nexus datacenter switches. Performance data are also given.

check_cisco_ping

Perl based telnet to a Cisco and uses ping, supports vrf routing tags.

check_cisco_ping_ssh

check ping from cisco router, using ssh.

check_cisco_ports_bandwidth

1) Scan network interfaces of a Cisco Switch 2) Measure average bitrate from last measurement for all ports or one interface 3) Display peak bitrate and the port associated with it with warning and critical thresholds 4) Produce performance data for al ...

check_cisco_power_supply

IPV6 ready, state of the art Non-Blocking / Async I/O one-flow SNMP Check for all CISCO devices (see details) Using state of the art non-blocking/async IO (EV and Mojolicious) Using DNS Native non-blocking resolver ! IPV6 ready !!! ...

check_cisco_router_temp

This Nagios plugins is to monitor Cisco router's temperature.

check_cisco_ssh_user_login

check_cisco_ssh_user_login 1.0 What it does * Using state of the art non-blocking/async IO (EV and Mojolicious) * Proper error handling ! * Login via SSH (hostname, username, password) * Issue command "show users" * Parse the output and find the u ...

check_cisco_status

This perl script is flexable enough to check the status of a cisco switch/router/MDS. It was born to check if a cisco MDS port is up or down using SNMP. It is rather easy to use, and even easier to modify to do what is needed.

check_cisco_tp

Run multiple checks against Cisco Telepresence devices.