Directory

Enhanced Host Search

This small tutorial help you setup a more advanced "host search" box in your nagios interface, using ajax, python/perl/php and the ndo_utils.

Enhanced SNMP Windows Disk Check

Perl script that uses SNMP (via snmpget) to get disk usage information from Windows hosts. Outputs usage %, total, used and free space in human-readable format with auto-scaling (KiB up to TiB).

Enhanced SNMP Windows Disk Check - Check all partitions...

Based on the check_win_snmp_disk.pl script posted here by Dan Capper. Enhancements - all partitions are detected dynamically and tested. Detailed check report (includes Drive letter + supplied threshold). Most "critical" drive will be shown first. Some er ...

Enhanced Windows Disk Check

Perl script that uses SNMP (via snmpget) to get disk usage information from Windows hosts. Outputs usage %, total, used and free space in human-readable format with auto-scaling (KiB up to TiB).

Enhanced Windows eventlog check

Advanced options for filtering and alerting on eventlog events. *requires .NET 2.0 to work

Enhancing Nagios with Python Plugins

Enterprise PHP (PHP London Conference 2008)

Enterprise Vault plugin

Enterprise Vault plugin for Nagios. Uses Powershell, so must run in Windows and must have access to Enterprise Vault DLLs Checks: space, services, various DBs, Vault Store partitions, Windows events, indexes and indexes backup mode, tasks etc.

Environmental monitoring with BME680

Environmental monitoring with Raspberry Pi and BME680 and Nagios / NRPE Python3 script run by NRPE. Assumes the BME680 device is already attached to the Raspberry Pi. Software setup Install the required library: sudo pip3 install adafruit- ...

ESensors

The ESensors EM01 HVAC Monitor is a digital environmental monitor capable of monitoring temperature, relative humidity and illumination.

Esensors Websensor Nagios XI Monitoring Wizard

A Nagios XI configuration wizard for monitoring temperature, light (illumination), and humidity with a Websensor EM01B.

ESP32-Nagios-NRDP

Arduino-ESP32 example sketch to send device and sensor data to NagiosXI via NRDP.

Esx Checks using php and ssh keypairs

Some esx checks written in php using a ssh keypair system for people who want to keep their system certification by not installing external software and don\'t want to use snmp.

ESX CPU Monitoring

ESXI Dell perc HDD/SDD S.M.A.R.T. check

Linux plugin that uses ssh to remotely login on ESXi hosts and check the S.M.A.R.T. on all HDDs/SSDs for this controller

ESXi Snapshots

This bash scripts checks for checks existence of snapshot on VMware ESXi (currently tested on ESXi 5.0 Update 1)

Ethan Galstad - Keynote Presentation

Ethan is the creator of Nagios from its early days as "NetSaint" in 1999. He currently serves as the President of Nagios Enterprises and is involved in development, architectural design, and various management duties. In his presentation, Ethan talks abo ...

Ethan Galstad - Nagios XI Overview

Ethan is the creator of Nagios from its early days as "NetSaint" in 1999. He currently serves as the President of Nagios Enterprises and is involved in development, architectural design, and various management duties. Ethan provides an introduction to Na ...

Event chain exists

This condition can be added into Nagios Reactor to test if given identifier exists. Check identifiers can be found in the general tab->More Info.

Event chain is active

This condition can be added into Nagios Reactor to check if the event chain is currently running. Check identifiers can be found in the general tab->More Info.

Event chain is run from source IP

This condition can be added into Nagios Reactor to test what source IP address the event chain was invoked from. Install/update condition through Administration -> Conditions

Event chain run method is

This condition can be added into Nagios Reactor to test how the event chain is invoked. Install/update condition through Administration -> Conditions

Event Host Change

Event handler to enable or disable active checks for all services on a host depending on the host state.

Event Submitter

This script is designed to make it easier to send service events to Nagios from command line or batch job.

Eventlog Checker - dotNET Based

Checks a specified Windows Eventlog for any specified event types. Supports filtering, searching for event type ids, etc. This requires at least the .NET 1.1 Framework to be installed on the serve

example processing service performance data

A script to store performance data in rrdtool databases written in perl.

Exchange 2010

Monitor Exchange 2010 DAG replication, public folder availability and overall replication health.

Exchange 2010 CAS

Exchange Client Access Checks for 2010 These use the inbuilt test functionality in Exchange through the Exchange Management Shell. These tests log in using the test cas users to the various servers and actually test functionality AND response. So it wi ...

Exchange 2010 Content Index State Check

This powershell plugin for the NSCP Client (former known as NSClient++) can be used inside an Nagios environment to monitor the content index on a Microsoft Exchange 2010 Mailbox server.

Exchange 2010 DAG Mailbox check

Full disclaimer: this is a mish-mash of other scripts and random commands found in forums etc. I tried to find the original authors for credit but was unable. Sorry if some of this script is you and you aren't mentioned! Use this plugin to check the st ...

Exchange 2010 DAG Replication Health Check

This powershell plugin for the NSCP Client (former known as NSClient++) can be used inside an Nagios monitoring environment to monitor the replication health from a Microsoft Exchange 2010 database availability group (DAG).

Exchange 2010 Hub Transport Queues Check (inc. performa...

This powershell plugin for the NSCP Client (former known as NSClient++) can be used to monitor the mail queues on a Microsoft Exchange 2010 hub transport servers. It will provide the amount of emails in the queues as performance data to the Nagios environ ...

Exchange 2010 mailbox backup state check

This powershell plugin for the NSCP Client (former known as NSClient++) can be used inside an Nagios environment to monitor the backup state (e.g. if an backup software created successfully an backup from an MS Exchange MailBox) on an Microsoft Exchange 2 ...

Exchange 2010 Performance Counters

Here are several scripts I put together to monitor various exchange 2010 performance counters. Activesync, Memory, Database, RPC, Message Queue, Throttling counters. A good start for getting a handle on Exchange 2010. Hope people can find this useful. ...

Exchange 2010 Services Check

This powershell plugin for the NSCP Client (former known as NSClient++) can be used inside an Nagios environment to monitor the services from an Microsoft Exchange 2010 server.

Exchange 2010-2013 database size check

Check the size of your exchange database.

Exchange 2010/2013 Message Tracking Logs

This dashboard monitors the Message Tracking Logs in Exchange 2010 onwards. I can't take credit for developing this, I just adapted it for NLS - Original creator here: https://elijahpaul.co.uk/analysing-exchange-2013-message-tracking-logs-using-elk-ela ...

Exchange 2013 Content Index State Check

This powershell plugin for the NSCP Client (former known as NSClient++) can be used inside an Nagios environment to monitor the content index on a Microsoft Exchange 2013 Mailbox server.

Exchange 2013 DAG Health Check

Powershell Script for checking DAG health. Needs NSClient++ on the Exchange DAG member server that is monitored.

Exchange 2013 DAG Replication Health Check

This powershell plugin for the NSCP Client (former known as NSClient++) can be used inside an Nagios monitoring environment to monitor the replication health from a Microsoft Exchange 2013 database availability group (DAG).

Exchange 2013 Hub Transport Queues Check (inc. performa...

This powershell plugin for the NSCP Client (former known as NSClient++) can be used to monitor the mail queues on a Microsoft Exchange 2013 hub transport servers. It will provide the amount of emails in the queues as performance data to the Nagios environ ...

Exchange 2013 mailbox backup state check

This powershell plugin for the NSCP Client (former known as NSClient++) can be used inside an Nagios environment to monitor the backup state (e.g. if an backup software created successfully an backup from an MS Exchange MailBox) on an Microsoft Exchange 2 ...

Exchange 2013 Server Health

Exchange 2013 Server Health/Component Health Check for Nagios and use with NSClient/NRPE.

Exchange 2013 ServerComponentState Health

Powershell Script for checking Exchange Server's ServerComponentState. ServerComponentState is an indicator for the overall health of your Exchange Server and all its components like OWA, RPC, ActiveSync, etc.

Exchange 2013 Services Check

This powershell plugin for the NSCP Client (former known as NSClient++) can be used inside an Nagios environment to monitor the services from an Microsoft Exchange 2013 server.

Exchange 2016 Content Index State Check

This powershell plugin for the NSCP Client (former known as NSClient++) can be used inside an Nagios environment to monitor the content index on a Microsoft Exchange 2016 Mailbox server.

Exchange 2016 DAG Replication Health Check

This powershell plugin for the NSCP Client (former known as NSClient++) can be used inside an Nagios monitoring environment to monitor the replication health from a Microsoft Exchange 2016 database availability group (DAG).

Exchange 2016 Hub Transport Queues Check (inc. performa...

This powershell plugin for the NSCP Client (former known as NSClient++) can be used to monitor the mail queues on a Microsoft Exchange 2016 hub transport servers. It will provide the amount of emails in the queues as performance data to the Nagios environ ...

Exchange 2016 mailbox backup state check

This powershell plugin for the NSCP Client (former known as NSClient++) can be used inside an Nagios environment to monitor the backup state (e.g. if an backup software created successfully an backup from an MS Exchange MailBox) on an Microsoft Exchange 2 ...

Exchange 2016 Services Check

This powershell plugin for the NSCP Client (former known as NSClient++) can be used inside an Nagios environment to monitor the services from an Microsoft Exchange 2016 server.