Directory

How To Monitor VPN Active Sessions and Temperature Usin...

This article will demonstrate how to monitor active sessions and temperature of VPN device using Nagios.

G8052/G8264 monitoring plugin

The plugin can be used to monitor the following for G8052/G8264 IBM switches -- SNMP -- Temperature -- Fan -- Global Health status -- Power -- CPU Utilization The plugin uses SNMPv1/v2c to get the information from the swi ...

Fujitsu Siemens

clone of check_temperature_servers_room.sh. Not cleaner or better but works with Primergy RX300 S6. Syntax : check_temperature_RX300S6.sh IP Example : check_temperature_RX300S6.sh 192.168.1.l

Esensors Websensor Nagios XI Monitoring Wizard

A Nagios XI configuration wizard for monitoring temperature, light (illumination), and humidity with a Websensor EM01B.

ESensors

The ESensors EM01 HVAC Monitor is a digital environmental monitor capable of monitoring temperature, relative humidity and illumination.

DSMP2: hardware monitoring for Windows via SNMP

DSMP2 for MS Windows offers the possibility to monitor various hardware sensors of a PC such as fan and temperature via SNMP and to send SNMP traps if thresholds are exceeded. DSMP2 supports a large number of monitoring ICs. Scripts for nagios3 are includ ...

ds18b20

Written in C, ds18b20 can locate all ds18b20 probes connected to the system (Raspberry PI) via the GPIO pins and either run as a daemon and log temperatures to logfiles or run as a nagios check via nrpe.

dell_temperature_rise_check

Reports excessive rise of temperatures on a dell server relying on omreport utility from dell. This plugin will not use absolute temperature, just its relative change. Used to warn of fan or Air conditionning failure.

Dell OpenManage Chassis

Checks the chassis hardware (fans, temperatures, voltages et al) of Dell servers using OpenManage.

Compaq-HP Proliant Server and Blade Checks (SNMP)

Check CPUs, fans, array controllers, logical / physical drives, temperature and power supplies on your Proliant servers or blade systems through SNMP.

CISCO ASR9K RSP / Inlet / Hotspot Temperature Monitorin...

check_watchptTemp

Plugin to check the temperature from Digi Watchport sensors. Linux and Windows versions.

check_ups_snmp

Single bash script to check: * battery temperature (with critical/warning levels) * battery charge status (e.g.: normal, low, depleated, etc) * output type (e.g.: normal, bypass, battery, etc) * number of active alarms

check_temp_weathergoose

This is a simple check that checks the temperature (and converts it to Fahrenheit) for Weathergoose environmental monitors. I would guess this would work fine with other IT Watchdogs environmental monitors, i.e. Supergoose, Microgoose, Minigoose.

check_temp_hum_th2e

The script, check_temp_hum_th2e allows the user to monitor the temperature and humidity of TH2E sensor devices. The data will be fetched by the script via XML. After the script has parsed the XML data, the script will return the appropriate values. Please ...

check_temp_ha7net

Checks temperature using the Embedded Data Systems HA7Net 1Wire bridge

check_temperature_servers_room

Shell Script to get the temperature of the server room via the sensors for Fujitsu Primergy TX200S4

Check_Temperature

This script will readout the CPU temperature on a windows system

check_temper.sh

check_temper is a monitoring plugin for Nagios, which is used to monitor temperature and humidity with TEMPer humi thermometers.

check_TEMPer

This Nagios plugin allows extraction of temperatures from the inexpensive TEMPer USB thermometer on a Linux machine.