Category: Cisco

check_ironport_snmp

Monitor CPU, RAM, Queue, RAID and Fan status, and other important parameters on Cisco IronPort Email Security Appliances.

check_sfp_cisco

With this check you can monitor using Cisco DOM (Digital Optical Monitoring) thru SNMP. This is similar to IOS command: "show interface transceiver detail"

check_snmp_cisco

Usage: ./check_snmp_cisco -H 192.168.1.1 -C public -i Fa0/15 -w unknown -c down check_snmp_cisco -H ADDRESS check_snmp_cisco -C STRING check_snmp_cisco -i INTERFACE check_snmp_cisco -w INTEGER check_snmp_cisco -c INTEGER check_snmp_cisco ...

check_snmp_cisco improved version

SNMP check for cisco devices (routers/switches) returning state of different interfaces. By Martin Fuerstenau

check_snmp_cisco_asa_fw_temp

This Nagios Plugins is SNMP Based, used to monitor only Cisco ASA Firewall’s Temperature of all available sensor/s.

check_snmp_cisco_port_channel.pl

Checks integrity of Cisco 3750 switch port channels. This will check if the port channel is up. It will also inform you if one of the members of that port channel is down.

check_snmp_cisco_wlc - Check the avaibility of Cisco WL...

check_snmp_cisco_wlc is a Nagios plugin to monitor the status of Cisco Wireless Lan Controller (former Airespace) access points. By Martin Fuerstenau

check_snmp_wlc_ap

Nagios check in python review the number of APs associated to a Cisco Wlan Controller using snmp and trigger alarms if less than critical or warning threshold.

check_vlan_membership

Perl plugin for check the VLAN-memberships on a Cisco-switch.

Check_WLC_Client

Check Cisco WLC or WISM current online user number.

Cisco - Check Call Manager (CCM) - SNMP v1, v2c, v3

Check Cisco Call Manager CCM - Version 2.4 (29/12/2009) > CCM informations > Devices registered per type

Cisco - Check firewall ASA and PIX

Check Cisco firewall ASA and PIX- Version 2.2 (07/03/2009)> Failover status> Sessions used (current and max)

Cisco - Check Juniper SA - SNMP v1, v2c, v3

Check Juniper SA - Version 1.2 (29/12/2009) > Disk > Memory > Users connected

Cisco - Check MSFC

Check Cisco MSFC- Version 2.2 (07/03/2009)> Modules status

Cisco 6500 and 4500 Module Check

This script monitors the Modules on both Cisco Catalyst 6500 and Catalyst 4500 switches.

Cisco AP Profile Status

This script gather information (via SNMP) from Cisco 4400 Series Wireless Controller about the status of 4 profiles associated with each Cisco AP

Cisco AP Traffic

This script gather information (via SNMP) from Cisco 4400 Series Wireless Controller about traffic utilization of Access Point in question

cisco crc & interface reset check using bash plugin

Bash plugins for Nagios that I am using to check Cisco interface resets & crc.

Cisco IPS Management

This is a plugin to monitor and reset Cisco IPS devices. It makes use of SSH and expect to perform these functions.

Cisco Switches and routers

Generic snmp v1 plugin to perform checks on any Cisco switches/routers. For exemple checks like Vlan1, Po1, Gi1/0/1, Fa0, ATM0, FastEthernet0/1 etc ...are supported (SNMP package is required)

Cisco WLC users Script (PHP)

Interfacetable_v3t

Interfacetable_v3t.pl is a Nagios(R) plugin that allows you to monitor the network interfaces of a node (e.g. router, switch, server) without knowing each interface in detail. This plugin comes from check_interface_table.pl / check_interface_table_v2.pl, ...

IronPort Plugin

This is a script to check RAM, CPU, QUEUE, Work Queue, and Mail Rate on Ironport Appliances.

Ironport Plugin modified

This is a script to check RAM, CPU, QUEUE, Work Queue, and Mail Rate and other important parameters on Cisco Ironport Appliances

Ironport Plugin modified to include feature key expiry ...

This is a script to check RAM, CPU, QUEUE, Work Queue, and Mail Rate and other important parameters on Cisco Ironport Appliances. Modified to include feature key license expiry checks.

Ironport plugin with perfdata

This is a script to check RAM, CPU, QUEUE, Work Queue, and Mail Rate and other important parameters on Ironport Appliances and it returns performance data for graphing the results.

modified check_snmp_cisco_port_channel

modified version of check_snmp_cisco_port_channel.pl for use with multiple port channels. tested on Cisco 4510R

RTR or SAA For Cisco Routers

These two plugins are used with cisco routers to extract RTR information using snmp.

updated IronPort Plugin for C/X- and M-Series appliance...

Updated check_ironport plugin for C/X and M-Series appliance from 6.x onwards (including upcoming AsyncOS 7.5)