Category: RAID Controllers

check_intel_rst

check_intel_rst is a Windows plugin for Nagios which checks the status of Intel’s Rapid Storage Technology (RST) RAIDs. The plugin determines the status of Raids, Raid-Controllers and of individual discs (S.M.A.R.T), while all stripe sets are supported ...

check_lsi

Check LSI raid controller via SNMP

check_lsiutil

Checks LSI controllers RAID status via lsiutil program

check_megaraid

Uses MegaCli to check the status of disks attached to an LSI RAID controller. Checks the logical disks, the physical disks and missing disks. Provides support info like serial numbers.

check_megaraid_sas

A plugin to check the health and status of disk and logical drives attached to LSI megaraid SAS controllers.

check_megaraid_sas v2

Check a megaraid array's logical disks, physical disks, and batteries/BBUs. Uses MegaCli. This is a fork of check_megaraid_sas.

check_megaraid_windows

check_megaraid_windows is a Windows plugin for Nagios which checks the status of LSI/MegaRaid Raid Controller. The plugin determines the status of Raidsets, RAID controllers and of individual discs (S.M.A.R.T), while all stripe types are supported.

check_megasasctl

check_mfi

Plugin to check the state of drives and volumes on an LSI Megaraid SAS/SATA based controller using the mfi driver under FreeBSD. Requires FreeBSD 7.3+ or 8.0+ for mfiutil.

check_mpt_raid

This Plugin determines the status of a MPT RAID controller. It will call the binary mpt-status to get the needed information.

check_mpt_status

Check Plugin which uses mpt-status to check RAID Status of LSI Logic 1030 RAID Controllers

check_mylexraid

A plugin to check the status of Mylex/LSI 1030 raid controllers

check_per5i

Check the status of PERC5/i RAID controllers.

check_perc

A perl script that uses SNMP to monitor Global State, Logical Disk States, Physical Disk States, and Controller States for either Array Manager or Storage Manager.

check_perc6i.sh

simple script to check if perc6i raid is degraded or has critical or offline disks

check_promise_vtrak_chassis

A Nagios plugin to monitor the state of a Promise VTrak disk shelf. Thanks to contributions, this should support: * VTrak M200i, M200, E310, M300i, E830 and compatible models

check_raid

Check all RAID volumes (hardware and software) that can be identified. Probably compatible with all Nagios derivatives, just haven't tested on them Download latest version from project homepage.

check_raid_amrstat - Dell AMR PERC4 FreeBSD

Checks the status of PERC4 or similar MegaRAID SCSI RAID controllers under FreeBSD.

check_raid_b110i.pl

Just executes "dmraid -s" and see if status is "ok" or "inconsistent".

check_raid_dl320

Check Embedded Raid on DL320g5. This version use vbs and you can use it without installing perl (needed for the Unix-ported version).

check_sas2ircu

Checks LSI SAS2 RAID controllers RAID status via sas2ircu program

check_serveraid

Checks remote host for status on IBM ServeRAID-cards

check_smartarray ^Popular

Checks HP Smart Array (CISS) controller using only tools/commands in FreeBSD base (no perl or hpasm required).

check_snmp_raid / check_sasraid_megaraid

This plugin uses SNMP to check status of raid cards and NAS devices. The type of controller is specified with -T option. Supported types are: megaraid, sasraid, perc3, perc4, perc5, perc6, perch700, mptfusion, sas6ir, sas6, adaptec, hp, smartarray, eti ...

check_sonicwall_cdp_4440i.pl

A perl active plugin that use www::mecanise to retreive "SonicWall CDP 4440i"'s RAID5, hdds and user quotas information. May work as well for the SonicWall CDP series.

check_stex

This is a Plugin to check the status of a Promise Supertrak EX Raid Controller. It will need the following tools to be installed: Promise cli (cliib) sudo screen expect This is due to the fact that Promise cli can't simply be run non-interactive- ...

check_tw_cli

check_tw_cli reports the raidstatus of 3ware raids based on the results of tw_cli.

check_xserve_raid

A Nagios plugin for monitoring Apple Xserve RAIDs. Checks for many problems. Pure Python 2.4 implementation.

Compaq Smart Array

A plugin to check status of the Disks of an compaq smart array controler.

DAC960 plugin

A plugin to check status of the RAID of a Mylex (possibly other models too) DAC960 controler.

Dell Array Disks Status Script

This is a bash script that checks all disk status on Dell Servers. You have to have the Dell MIBs installed in your Nagios system, relies on snmpwalk to pull the information.

Dell OpenManage Storage

Checks storage devices (disks, RAIDs, controllers) attached to Dell server systems.

FreeBSD HP Compaq SmartArray check

Check the status of your SmartArray RAID under FreeBSD

Linux Software Raid Plugin for 32-bit and 64-bit system...

Checks Linux Software Raid (also known as MD Raid). Works on both 32-bit and 64-bit systems

LSI Hardware RAID - S.M.A.R.T Monitoring

Plugin to discover any amount of physical drives attached to any LSI Hardware RAID Controller, query and report back on the S.M.A.R.T health of the attached physical drives. Relies on smartctl, and storcli.

LSI Mega RAID plugin for 32-bit and 64-bit systems

Plugin to test LSI MegaRaid or Dell Perc arrays on 32-bit and 64-bit systems

Megaide RAID controller

This plugin checks the status on a Megaide RAID-controller.

MegaRaid CLI for Windows

NagiosPlugin-HPSmartArrayController

A small Ruby plugin for Nagios for Smart Array controllers (all models supported by hpacucli)

Nexsan ATAboy RAID enclosure

Extract status from Nexsan ATAboy raid controller

PERC3Di I

plugin for checking DELL raid controllers

PERC3Di II

Plugin for checking DELL raid controllers.

Plugin for Intel(R) RAID SAS-controllers and Intel Embe...

Plugin to test Intel(R) RAID controllers using SAS software stack and Intel Embedded Server RAID Technology II RAID products

RAID - Hardware [LSI/3ware/Areca/Adaptec] / Software ar...

I decided to post my own storage monitoring plugin as I found no good alternative, hope you find it useful! This plugin will monitor health & missing components of: - Hardware RAID (supported RAID controllers: LSI, 3ware, Areca, Adaptec): - Controlle ...

RAID monitoring script - LSI/PERC/3ware/HP Smart Array

Monitors RAID and SMART information: virtual disk status, write-cache status, BBU status, pending sectors, relocated sectors ("defect list" for SAS), temperature, self-test status.

Simulation using check_linux_raid and mdadm

A step by step guide on using check_linux_raid to test a software RAID device.

SmartArray 5300 Check Status

This plugin check the status of logical array status and return status code

SmartArray 6i 5i Check status

This plugin checks the status of logical array status and return status code.

SmartArray P400 Check status

This Plugin check the status of logical array status and return status code

Windows NRPE plugin to check HP SmartArray controllers