DirectorySearch Exchange
Search All Sites
Nagios Live Webinars
Let our experts show you how Nagios can help your organization.Login
New ListingsDirectory Tree
Directory
alfred
byalfred, August 4, 2011
hoi,
the plugin works good for me on HP and cisco switches. i made a small fix for links that are unused (traffic lower than 1kbit/s) to avoid an uninitialized $prefix_x error.
after line 349:
if ( $x
the plugin works good for me on HP and cisco switches. i made a small fix for links that are unused (traffic lower than 1kbit/s) to avoid an uninitialized $prefix_x error.
after line 349:
if ( $x
i tested it with a 2960s stack and it seems to work perfectly
byalfred, July 13, 2011
great plugin, i use it for DL380G7 and DL180G6 with ubuntu 10.04 x64
thank you for that plugin!
thank you for that plugin!
byalfred, June 26, 2011
hello,
thanks for that plugin.
i raised the warninglevels on weekends
my $weekday=`date +\%u`;
if ($weekday == 7 || $weekday == 1) {
$warningAge=72;
$criticalAge=96;
}
thanks for that plugin.
i raised the warninglevels on weekends
my $weekday=`date +\%u`;
if ($weekday == 7 || $weekday == 1) {
$warningAge=72;
$criticalAge=96;
}
byalfred, April 6, 2011
thanks for the plugin, works perfect on ubuntu 10.04 x64 with HP DL380G7
in line 102 i added a "sudo"
my $hpasmcli = "sudo hpasmcli -s 'show iml'|";
and in ubuntu the hpasmcli is in /sbin instead of /usr/sbin
nagios ALL=NOPASSWD: /sbin/hpasmcli
thanks
alfred
in line 102 i added a "sudo"
my $hpasmcli = "sudo hpasmcli -s 'show iml'|";
and in ubuntu the hpasmcli is in /sbin instead of /usr/sbin
nagios ALL=NOPASSWD: /sbin/hpasmcli
thanks
alfred
byalfred, March 2, 2011
hello,
nice plugin. my backup runs at night an finishes before midnight so i changed the date:
my $date = strftime("%d-%b-%Y", localtime(time-86400));
regards
alfred
nice plugin. my backup runs at night an finishes before midnight so i changed the date:
my $date = strftime("%d-%b-%Y", localtime(time-86400));
regards
alfred
byalfred, December 30, 2010
hi,
tested on cisco catalyst 2960s (stacked) and it works perfectly
./check_cisco_temp.pl -s XXXXXX -C public -w 40 -c 50
OK: SW#2, Sensor#1, GREEN : 36 Grad C normal! SW#1, Sensor#1, GREEN : 36 Grad C normal!
tested on cisco catalyst 2960s (stacked) and it works perfectly
./check_cisco_temp.pl -s XXXXXX -C public -w 40 -c 50
OK: SW#2, Sensor#1, GREEN : 36 Grad C normal! SW#1, Sensor#1, GREEN : 36 Grad C normal!
hello,
works perfect on dell r310 with H700a
lspci:
05:00.0 RAID bus controller: LSI Logic / Symbios Logic LSI MegaSAS 9260 (rev 04)
thank you
alfred
works perfect on dell r310 with H700a
lspci:
05:00.0 RAID bus controller: LSI Logic / Symbios Logic LSI MegaSAS 9260 (rev 04)
thank you
alfred
hi,
works on x3250 M3 for me - could only test "health" with putting out an HDD.
temperatures etc are alle shown correctly
thank you very much
alfred
works on x3250 M3 for me - could only test "health" with putting out an HDD.
temperatures etc are alle shown correctly
thank you very much
alfred
