Search Exchange
Search All Sites
Nagios Live Webinars
Let our experts show you how Nagios can help your organization.Login
New ListingsDirectory Tree
Juniper SRX240 Monitoring Plugin (snmp)
Current Version
1.12
Last Release Date
2016-12-02
Compatible With
- Nagios 2.x
- Nagios 3.x
- Nagios 4.x
- Nagios XI
Owner
License
GPL
Hits
7456
Files:
| File | Description |
|---|---|
| check_juniper.py | check_juniper.py |
What it does:
- get FRU Units, its name and state based on OID (FRU)
- gets ( if aviable ) TEMP of FRU Units (TEMP)
- gets CPU- and MEM-Usage of System (SYSTEM)
- gets CPU- and MEM-Usage of SPU (SPU)
- gets, based on last Check, average throughput of Networks) (NETWORK)
For FRU,TEMP,SYSTEM and SPU monitoring this plugin runs through the ContentsIndex and getting Name, Type and State (Temp,CPU,MEM-Use) for each element listed in there. Based on what u specified to monitor ( -W ) it will return what you want.
For TEMP, SPU and SYSTEM is a definition of warning/crit max requierd.
In FRU Mode it will only return any Module isnt fine (online). if a FRU is Offline, it will return the Offline-Reason, too (textual). Empty slots are ignored.
In NETWORK mode, it will on first run store a ninimal file in /tmp, witch contains InOctets, OutOctets and Timestamp, what will be needed to calculate average speed on next run. It uses the Counter64 In/Out octets.
NOTE: Nagios-User need access rights to save Performance-Data Temporary( /temp) and run a Ping- Precheck ( /bin/ping )
Feel free to contact me, if you have any improvement.
17.10.2016
--BUGFIX for calculation of Network speed ---
02.12.2016
-- Fixed Minor Bug and Help Output reported by uvznap --
For TEMP, SPU and SYSTEM is a definition of warning/crit max requierd.
In FRU Mode it will only return any Module isnt fine (online). if a FRU is Offline, it will return the Offline-Reason, too (textual). Empty slots are ignored.
In NETWORK mode, it will on first run store a ninimal file in /tmp, witch contains InOctets, OutOctets and Timestamp, what will be needed to calculate average speed on next run. It uses the Counter64 In/Out octets.
NOTE: Nagios-User need access rights to save Performance-Data Temporary( /temp) and run a Ping- Precheck ( /bin/ping )
Feel free to contact me, if you have any improvement.
17.10.2016
--BUGFIX for calculation of Network speed ---
02.12.2016
-- Fixed Minor Bug and Help Output reported by uvznap --
Reviews (1)
byuvznab, November 27, 2016
1 of 1 people found this review helpful
This saved me hours (if not days) of work.
It works perfectly on my SRX100H.
Few comments to consider as improvements:
1. One minor bug exist in SNMPGET(oid) where Version needs to check if it's a string and fix it: result = netsnmp.snmpget(oid, Version = 2 if options.version == "2c" else int(options.version), DestHost=options.host, Community=options.community, Timeout=800000, Retries=0)[0]
2. Help text should state SPU instead of CPU as a valid input for the -W switch
3. It should be noted that it is assumed that the Nagios service user has access to /bin/ping and /tmp/juniper_lastdata.txt (mine wasn't and it took me 2 hours to find out why nothing works). Chown those two files if you share the same situation as I do.
4. NETWORKS switch won't work if /tmp/juniper_lastdata.txt doesn't exist. Quick fix: touch /tmp/juniper_lastdata.txt
5. I started writing an extension to check the disk utilization, but it's taking me longer than expected. I'll post my addition if I get around to finishing it.
Again, AWESOME work! Thanks for this plugin.
It works perfectly on my SRX100H.
Few comments to consider as improvements:
1. One minor bug exist in SNMPGET(oid) where Version needs to check if it's a string and fix it: result = netsnmp.snmpget(oid, Version = 2 if options.version == "2c" else int(options.version), DestHost=options.host, Community=options.community, Timeout=800000, Retries=0)[0]
2. Help text should state SPU instead of CPU as a valid input for the -W switch
3. It should be noted that it is assumed that the Nagios service user has access to /bin/ping and /tmp/juniper_lastdata.txt (mine wasn't and it took me 2 hours to find out why nothing works). Chown those two files if you share the same situation as I do.
4. NETWORKS switch won't work if /tmp/juniper_lastdata.txt doesn't exist. Quick fix: touch /tmp/juniper_lastdata.txt
5. I started writing an extension to check the disk utilization, but it's taking me longer than expected. I'll post my addition if I get around to finishing it.
Again, AWESOME work! Thanks for this plugin.
Owner's reply
Hey uvznap,
thanks for your review. I have updated the File in my Project. Please let me know when you have finished your disk utilization plugin, im interested in that ;)
Greetings,
Kalle
