APC UPS Health and Load

Description

Simple Checkcommands based on check_snmp to monitor APC UPS Devices.

Project Details

Current Version

Last Release Date

June 23, 2009

Owner

Nagios Exchange

Website

http://www.moehrenbude.de/

Project Notes

command[snmp_ups_stat]=/usr/local/nagios/libexec/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o .1.3.6.1.4.1.318.1.1.1.2.1.1.0 -w 3 -c 4 -l 'Main Battery Status'

command[snmp_ups_capa]=/usr/local/nagios/libexec/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o .1.3.6.1.4.1.318.1.1.1.2.2.1.0 -l 'Adv. Battery Capacity' -u '%'

command[snmp_ups_temp]=/usr/local/nagios/libexec/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o .1.3.6.1.4.1.318.1.1.1.2.2.2.0 -w 29 -c 40 -l 'internal Temperature' -u 'Grad Celsius'

command[snmp_ups_load]=/usr/local/nagios/libexec/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o .1.3.6.1.4.1.318.1.1.1.4.2.3.0 -w 60 -c 90 -l 'Output Load' -u '%'

command[snmp_ups_current]=/usr/local/nagios/libexec/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o .1.3.6.1.4.1.318.1.1.1.4.2.4.0 -w 30 -c 50 -l 'Output Current' -u 'Ampere 3~'

command[snmp_ups_volt]=/usr/local/nagios/libexec/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o .1.3.6.1.4.1.318.1.1.1.4.2.1.0 -l 'Output Voltage' -u 'Volt 3~'

command[snmp_ups_freq]=/usr/local/nagios/libexec/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o .1.3.6.1.4.1.318.1.1.1.4.2.2.0 -l 'Output Frequency' -u 'Herz'

User Reviews (2)

January 31, 2013

Worked Well

by: nishith

I would like to monitor below status of APC UPS. Let me know is it possible or not.

ALERT Report(Email/SMS) if UPS is on Battery Power
ALERT Report(Email/SMS) if UPS is on AC Mains Power

November 30, 2011

A simple and perfect way!

by: kwilium.at

I missed just one statement - the battery life time if the power fails.

But it was simple to find it out. Below you will find the correct ID/command.

command[snmp_ups_stat]=/usr/local/nagios/libexec/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o .1.3.6.1.4.1.318.1.1.1.2.2.3.0 -w 3 -c 4 -l 'Battery LifeTime'

Many Thanks Sir!