Build precise queries to find exactly what you need
Press ESC to close
Nagios World Conference 2026: Sept. 14-17 in St. Paul, MN | Learn More
Your review has been submitted and is pending approval.
Plugin to check the failover state of Cisco ACE 4700 Loadbalancer appliances
Current Version
Last Release Date
June 23, 2009
Owner
Nagios Exchange
Website
http://www.interhyp.de/index.html
Download URL
https://exchange.nagios.org/wp-content/uploads/project-files/2009/06/check_ace_failover
check_ace_failover
Check Plugin uses SNMP to query the ft state of two Cisco ACE 4700 Loadbalancer appliances.
*Returns OK for state Active - StandbyHot *Returns WARNING for state Active - (Initializing|Negotiation) *Returns CRITICAL for state Active - (Other than above) *Returns CRITICAL for state (Other than Active) - (All states)
Unfortunately you cannot query the peer state directly from the host, so you have to query the peer, too. So the syntax i.e. would be "check_ace_failover -H 192.168.0.1 -P 192.168.0.2 -C public"
hi, this is a great little plugin for checking the FT state of a single context. Would it be possible to query further up the oid tree to check for multiple FT groups? something like [nagios@nagio01 libexec]$ snmpwalk -v 2c -c public 192.168.1.1 1.3.6.1.4.1.9.9.650.1.1.4.1.2 SNMPv2-SMI::enterprises.9.9.650.1.1.4.1.2.1.1 = INTEGER: 3 SNMPv2-SMI::enterprises.9.9.650.1.1.4.1.2.1.2 = INTEGER: 5 SNMPv2-SMI::enterprises.9.9.650.1.1.4.1.2.1.3 = INTEGER: 9 SNMPv2-SMI::enterprises.9.9.650.1.1.4.1.2.1.4 = INTEGER: 9 SNMPv2-SMI::enterprises.9.9.650.1.1.4.1.2.1.5 = INTEGER: 5 SNMPv2-SMI::enterprises.9.9.650.1.1.4.1.2.1.6 = INTEGER: 9 if it could be happy with either active/standbyhot or standbyhot/active that would be a benefit as we split the load between prod and test. It would be good if it simply alerted on state change. thanks
You must be logged in to submit a review.
To:
From: