Watchguard Branch Office VPN Tunnels

Project Notes

Usage: check_wg_tunnels.sh [options]
# -h | --host: ip of device.
# -t | --tunnels: list of tunnels to check. Array of pairs of gateways.
###### Syntax "localGwIP1-peerGwIP1 localGwIP2-peerGwIP2 localGwIPn-peerGwIPn"
###### Example: "80.24.56.73-90.123.124.34 100.234.45.47-90.12.45.123 123.234.43.65-65.234.56.78"
# -v | --version: snmp version. Default 2. Depends on version you must specify:
###### 2: -s | --string: snmp community string. Default public.
###### 3: -u | --user: user. -p | --pass: password.

Example: check_wg_tunnels.sh -h 192.168.2.100 -s publicsnmp -t "80.24.56.73-90.123.124.34 100.234.45.47-90.12.45.123"
Example: check_wg_tunnels.sh -h 192.168.2.100 -v 3 -u read -p 1234567789 -t "80.24.56.73-90.123.124.34 100.234.45.47-90.12.45.123 123.234.43.65-65.234.56.78"

Output example
Ok. 79.98.225.6-81.47.104.44 is up. 192.168.223.2-195.89.176.194 is up. 79.98.225.6-85.119.3.252 is up
Critical. 79.98.225.6-81.47.104.44 is down. 192.168.223.2-195.89.176.194 is up. 79.98.225.6-85.119.3.252 is up