Build precise queries to find exactly what you need
Press ESC to close
Nagios World Conference 2026: Sept. 14-17 in St. Paul, MN | Learn More
Your review has been submitted and is pending approval.
A plugin for monitoring Infortrend based RAIDs, please note that this includes Sun StorEdge 3510 and 3511 RAIDs.
Current Version
Last Release Date
February 4, 2010
Owner
Nagios Exchange
Download URL
https://exchange.nagios.org/wp-content/uploads/project-files/2010/02/check_infortrend.py
A plugin to check the status of a RAID enclosure. This plugin uses SNMP to monitor the status and health of Infortrend RAIDs.
This plugin requires (at this time) python version 2.4 or higer of the python 2 series it is not compatible with python 3.
Detection of the RAID type is automatic, so running against an Infortrend Eonstore RAID or a Sun StorEdge 3510 or 3511 will just work. If you find other RAIDs that this can work against please email me the OID so I can add it into the autodetection.
This plugin checks amongst other things:
Hard Disk Status
Fan Status
Power Supply Status
Temperature Probes (Also returned as perfdata for graphing)
Logical Unit Status
Spare Status
Issues:
This plugin was developed against an Infortrend Eonstore A12U-G242 RAID enclosure as well as a Sun StorEdge 3510. I am sure that it can work against other RAIDs that are based off of the same chipset.
If you have any issues or suggestion please e-mail me: [email protected]
You must be logged in to submit a review.
To:
From: