Build precise queries to find exactly what you need
Press ESC to close
Your review has been submitted and is pending approval.
Check the storage area on IBM Servers
Current Version
1.1
Last Release Date
2012-02-11
Owner
Ivan Bergantin
Website
http://nagios-it.org
Compatible With
$ ./check_snmp_ibm_storage.sh
Check hardware storage on IBM server with SNMP - Version 1.0
usage: ./check_snmp_ibm_storage.sh [ -H value -C value -h ]
syntax:
-H --> Host - Name or IP Address -C --> Community SNMP (default public) -h --> Print This Help Screen
Required the ServeRAID or MegaRAID LSI package. Check your controller, find correct package in IBM site and install it.
2013 September: upload new version with a little fix. Now, the LSI controller is detected correctly.
./check_snmp_ibm_storage.sh -H -C public OK - Storage Overall Status is not detected ["Adaptec" "IBM ServeRAID 8k" Ver. "5.2-0 Memory: 256 MB on battery [Status ok] Status controller is ok [controller overall status is ok] Drive 1 is ok - "controller 1, enclosure 0, slot 0" [Vendor "IBM-ESXS" Model "VPBA146C3ETS11 N" FW "A496" - Serial "JFVGDBVC"] Capacity 140013 - Smart value is ok Drive 2 is ok - "controller 1, enclosure 0, slot 1" [Vendor "IBM-ESXS" Model "VPBA146C3ETS11 N" FW "A496" - Serial "JFVJ6D5C"] Capacity 140013 - Smart value is ok Drive 6 is ok - "controller 1, enclosure 0, slot 5" [Vendor "IBM-ESXS" Model "GNA300C3ESTT0Z N" FW "BH0G" - Serial "J802YTYK"] Capacity 286102 - Smart value is ok Array 1 is ok [State quickInited] - raid1 with capacity 139900 - Task Status: noTaskActive at 100 % [Priority task is low] Array 2 is ok [State optimal] - raid5 with capacity 858000 - Task Status: noTaskActive at 100 % [Priority task is low]
You must be logged in to submit a review.
To:
From: