Build precise queries to find exactly what you need
Press ESC to close
Your review has been submitted and is pending approval.
Weather plugin for Nagios that lets you check temperature, humidity, wind, rain fall, dewpoint, heat index, windchill, pressure, solar radiation, and UV index. This also reports performance data to Nagios for graphing. The plugin uses data from Weather Underground. If you have any questions, issues, or suggestions please do not hesitate to email me ([email protected]).
Current Version
2.0
Last Release Date
2013-09-23
Owner
Sam Dockery
Download URL
https://github.com/tuxthepenguin84/sam-weather
License
GPL
Compatible With
Sam Weather Ver. 2.0 Author: Sam Dockery Email: [email protected]
What's New with 2.0: 1. Warning & Critical levels 2. Added Pressure, Solar Radiation, & UV Index to parameters
To find your STATIONID, go to http://www.wunderground.com/wundermap/ and search for a station near your location. Click on the station and you will see an alphanumeric Station ID. Software requirements are LYNX, GREP, and CUT. These should be availble through your package manager (yum, apt-get, etc.) Should work with Nagios, NagiosXI, and any Unix/Linux system as long as the software requirements are met. Each weather parameter includes performance data (so long as the output isn't a string).
Troubleshooting Tips: 1. Make sure the plugin has the correct permissions on the file. chown nagios:nagios samweather or chown apache:apache samweather 2. Make sure you have the correct stationid, put it in all caps to be safe. Example: KALAUBUR4 3. Only use 1 weather parameter at a time. Might add the capability in the future for more parameters at a time. 4. If the plugin returns no data, either the weather underground site is unavailable or you have an incorrect stationid. 5. If you still have issues, verify you can open the stationid on the weather underground site. Replace your stationid with the one at the end of Example: http://api.wunderground.com/weatherstation/WXCurrentObXML.asp?ID=KALAUBUR4 6. Verify you have LYNX, GREP, and CUT installed.
Usage: ./samweather stationid weatherparameter warn crit
Example: ./samweather KALAUBUR4 temp 80 90
Output: Temperature: 79.5 F (26.4 C) | 'Temp F'=79.5 'Temp C'=26.4
Weather Parameters are: temp - Temperature in F & C heatindex - Heat Index in F & C humidity - Relative Humidity wind - Wind direction, degrees, and MPH precip - Precipitation today in Inches & Cent. press - Pressure in MB & In dewpoint - Dewpoint in F & C windchill - Windchill in F & C solar - Solar Radiation in watts/m^2 uv - UV Index
Huge thanks to Daniele at www.kernel-panic.it for assiting in the development of this plugin. And a thanks to weyoon on the Nagios Exchange for the suggestion of adding Pressure stats to the plugin.
Can I get the conditions Weather (rain, clear)? For example, use "getvalue condition" dont help me.
Thanks for this creative plugin - runs fine on my RaspberryPi / Nagios4.
Add the following to the script to add pressure (press): #Output for Pressure if [ $2 = "press" ] then VAR1=$(lynx -dump -source http://api.wunderground.com/weatherstation/WXCurrentObXML.asp?ID=$1 | grep pressure_mb | cut -d">" -f2 | cut -d"" -f2 | cut -d"" -f2 | cut -d" printf "Pressure: $VAR3 | 'MB'=$VAR1 'IN'=$VAR2n" exit fi
Thanks! I'll be adding this in to version 2.
You must be logged in to submit a review.
To:
From: