Build precise queries to find exactly what you need
Press ESC to close
Nagios World Conference 2026: Sept. 14-17 in St. Paul, MN | Learn More
Your review has been submitted and is pending approval.
Check the state of the redundant stack ring, switches in the stack ring and stackport status via SNMP.
Current Version
0.2
Last Release Date
2017-06-10
Owner
Michiel Timmers
Download URL
https://exchange.nagios.org/wp-content/uploads/project-files/2018/06/check_snmp_cisco_stack.pl
License
GPL
Compatible With
Version 0.2 - June 10 2017
Example outputs: ./check_snmp_cisco_stack.pl -H 192.168.1.1 -C public Ring Redundant: yes, Switch States: sw1(sn:AAAABBBCCCC)=ready, sw2(sn:EEEFFFGGGG)=ready, Port States: up(4),down(0),forcedDown(0) : OK
Tested on Cisco 9300 & 9500 Switches. My Command Output is as stated below. =========================== /usr/local/nagios/libexec/check_snmp_cisco_stack.pl -H 192.168.1.11 -C nnv007 -2 Ring Redundant: yes, Switch States: sw2(sn:FOCXXX)=ready, sw1(sn:FCWXXX)=ready, Port States: up(4),down(0),forcedDown(0) : OK =========================== 192.168.1.11: Switch IP Address. nnv007: SNMP Community Name. -2: SNMP Version 2 ===========================
You must be logged in to submit a review.
To:
From: