Build precise queries to find exactly what you need
Press ESC to close
Your review has been submitted and is pending approval.
Check OSPF Interface status and re-calculation.
Current Version
0.1
Last Release Date
2015-07-16
Owner
Michiel Timmers
License
GPL
Compatible With
Checks the OSPF Interface status and number of re-calculations using SNMP. Will report warning if there is a change in re-calculation in last 24 hours.
./check_snmp_cisco_ospf-interface.pl -H 192.168.1.1 -C public Interface Status: 172.20.10.10 = enabled, pointToPoint, active, 172.30.10.10 = enabled, otherDesignatedRouter, active, Re-calculations in last 24 hours: 172.20.10.10 = 0, 172.30.10.10 = 0,: OK
Very limited functionality with modern IOS-es, and typical MPLS VPNs. It is a IOS limitation, not the plugin itself. The only chance is to configure ospf traps on the router and trap handling, passive service on Nagios. IOS config: snmp-server host .... snmp-server enable traps ospf "Cisco IOS Release 12.0(26)S, 12.2(25)S, 12.2(27)SBC, 12.2(31)SB2 and later releases, the OSPF MIB and CISCO OSPF MIB will be supported only for the first OSPF process [....] SNMP traps will be generated for OSPF events that are related to any of the OSPF processes. There is no workaround for this situation." https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_ospf/configuration/15-sy/iro-15-sy-book/iro-mib-1850.pdf
You must be logged in to submit a review.
To:
From: