Build precise queries to find exactly what you need
Press ESC to close
Your review has been submitted and is pending approval.
Check status of Cisco OSPF.
Current Version
0.1
Last Release Date
2015-07-16
Owner
Michiel Timmers
License
GPL
Compatible With
Basic Cisco OSPF check using SNMP. For now only check Admin status of OSPF. Also reports RouterID and OSPF version
./check_snmp_cisco_ospf-general.pl -H 192.168.1.1 -C public OSPF (RouterID: 0.0.0.0, Admin status: Enabled, Version: 2) : OK
Very limited functionality with modern IOS-es, and typical MPLS VPNs. It is a IOS limitation, not the plugin itself. The only chance is to configure ospf traps on the router and trap handling, passive service on Nagios. IOS config: snmp-server host .... snmp-server enable traps ospf "Cisco IOS Release 12.0(26)S, 12.2(25)S, 12.2(27)SBC, 12.2(31)SB2 and later releases, the OSPF MIB and CISCO OSPF MIB will be supported only for the first OSPF process [....] SNMP traps will be generated for OSPF events that are related to any of the OSPF processes. There is no workaround for this situation." https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_ospf/configuration/15-sy/iro-15-sy-book/iro-mib-1850.pdf
You must be logged in to submit a review.
To:
From: