Search Exchange
Search All Sites
Nagios Live Webinars
Let our experts show you how Nagios can help your organization.Login
New ListingsDirectory Tree
check_route_nexthop.sh
Current Version
0.8
Last Release Date
2013-05-02
Compatible With
- Nagios 3.x
Owner
License
GPL
Hits
39478
Files:
| File | Description |
|---|---|
| check_route_nexthop.sh | check_route_nexthop.sh |
Meet The New Nagios Core Services Platform
Built on over 25 years of monitoring experience, the Nagios Core Services Platform provides insightful monitoring dashboards, time-saving monitoring wizards, and unmatched ease of use. Use it for free indefinitely.
Monitoring Made Magically Better
- Nagios Core on Overdrive
- Powerful Monitoring Dashboards
- Time-Saving Configuration Wizards
- Open Source Powered Monitoring On Steroids
- And So Much More!
This plugin checks via snmp a route associated with a gateway (next hop), if either the route is down or the gateway changes a warning alarm is triggered.
Sometimes we have dynamic routing protocols and we don´t know which route is active at a certain time.
This plugin checks via snmp a route associated with a gateway (next hop), if either the route is down or the gateway changes a warning alarm is triggered.
Usage:
check_route_nexthop.sh [host address] [snmp v2c community] [network] [netmask] [gateway]
Example:
./check_route_nexthop.sh 192.168.10.1 public 192.168.50.0 255.255.255.0 172.17.33.13
Notes:
Network, netmask and gateway need to be exactly as seen in device routing table (show ip route on ios).
Tested on Cisco IOS and Juniper Screenos. It uses standard RFC MIBS, so it should work on every decent network device.
Tested on Nagios Core 3.2.3, I hope it works on the rest of the versions.
TODO:
1. Command swithes (including help)
2. Snmp options (including support for snmpv3)
3. Detailed documentation
Please feel free to finish this plugin, I´m a bit lazy :P
This plugin checks via snmp a route associated with a gateway (next hop), if either the route is down or the gateway changes a warning alarm is triggered.
Usage:
check_route_nexthop.sh [host address] [snmp v2c community] [network] [netmask] [gateway]
Example:
./check_route_nexthop.sh 192.168.10.1 public 192.168.50.0 255.255.255.0 172.17.33.13
Notes:
Network, netmask and gateway need to be exactly as seen in device routing table (show ip route on ios).
Tested on Cisco IOS and Juniper Screenos. It uses standard RFC MIBS, so it should work on every decent network device.
Tested on Nagios Core 3.2.3, I hope it works on the rest of the versions.
TODO:
1. Command swithes (including help)
2. Snmp options (including support for snmpv3)
3. Detailed documentation
Please feel free to finish this plugin, I´m a bit lazy :P
Reviews (0)
Be the first to review this listing!
