ID;Status;Name;State;Failure Predicted;Progress;Type;Capacity;Used RAID Disk Space;Available RAID Disk Space;Hot Spare;Vendor ID;Product ID;Revision;Serial No.;Negotiated Speed;Capable Speed;Manufacture Day;Manufacture Week;Manufacture Year;SAS Address
0:0;Ok;Physical Disk 0:0;Online;No;Not Applicable;SCSI;136.62 GB (146695782400 bytes);136.62 GB (146695782400 bytes);0.00 GB (0 bytes);No;MAXTOR ;ATLAS10K5_146SCA;JNZY;J408BN9K;320;320;Not Available;Not Available;Not Available;Not Available
0:1;Ok;Physical Disk 0:1;Online;No;Not Applicable;SCSI;136.62 GB (146695782400 bytes);136.62 GB (146695782400 bytes);0.00 GB (0 bytes);No;MAXTOR ;ATLAS10K5_146SCA;JNZY;J407W95K;320;320;Not Available;Not Available;Not Available;Not Available
0:2;Ok;Physical Disk 0:2;Online;No;Not Applicable;SCSI;136.62 GB (146695782400 bytes);136.62 GB (146695782400 bytes);0.00 GB (0 bytes);No;MAXTOR ;ATLAS10K5_146SCA;JNZY;J4081FLK;320;320;Not Available;Not Available;Not Available;Not Available
0:3;Ok;Physical Disk 0:3;Online;No;Not Applicable;SCSI;136.62 GB (146695782400 bytes);136.62 GB (146695782400 bytes);0.00 GB (0 bytes);No;MAXTOR ;ATLAS10K5_146SCA;JNZY;J4080E4K;320;320;Not Available;Not Available;Not Available;Not Available

–CMD3 results:
Got 9 physical disk lines on controller 0

–CMD4–: /usr/bin/omreport storage vdisk controller=0 -fmt ssv

Virtual Disk 0 on Controller PERC 4e/Di (Embedded)

Controller PERC 4e/Di (Embedded)

ID;Status;Name;State;Progress;Layout;Size;Device Name;Type;Read Policy;Write Policy;Cache Policy;Stripe Element Size;Disk Cache Policy
0;Ok;Virtual Disk 0;Ready;Not Applicable;RAID-5;409.86 GB (440087347200 bytes);/dev/sda;SCSI;Adaptive Read Ahead;Write Back;Direct I/O;64 KB;

–CMD4 results:
Got 7 logical disk lines on controller 0
Status of physical disk 0:0: Ok, state: Online, predicted: No, progess: Not Applicable
Status of physical disk 0:1: Ok, state: Online, predicted: No, progess: Not Applicable
Status of physical disk 0:2: Ok, state: Online, predicted: No, progess: Not Applicable
Status of physical disk 0:3: Ok, state: Online, predicted: No, progess: Not Applicable
Status of virtual disk 0: Ok, state: Ready, progress: Not Applicable, type: RAID-5

Checking Enclosures on Controller 0:

–CMD5–: /usr/bin/omreport storage enclosure controller=0 -fmt ssv

Enclosure(s) on Controller PERC 4e/Di (Embedded)

ID;Status;Name;State;Connector ;Target ID;Configuration;Firmware Version;Service Tag;Asset Tag;Asset Name;Backplane Part Number;Split Bus Part Number;Enclosure Part Number;SAS Address;Enclosure Alarm
0;Ok;Backplane;Ready;0;6;Not Applicable;1.0 ;61900ER;Not Applicable;Not Applicable;Not Applicable;Not Applicable;Not Applicable;Not Applicable;Not Applicable

–CMD5 results:
Got 5 enclosure lines
Status of enclosure 0 (Backplane): Ok, state: Ready

Checking Connectors on Controller 0:

–CMD6–: /usr/bin/omreport storage connector controller=0 -fmt ssv
List of Connector(s) on Controller PERC 4e/Di (Embedded)

ID;Status;Name;State;Connector Type;Termination;SCSI Rate
0;Ok;Connector 0;Ready;SCSI Channel RAID Mode;Wide Terminated;Ultra 320M SCSI
1;Ok;Connector 1;Ready;SCSI Channel RAID Mode;Wide Terminated;Ultra 320M SCSI

–CMD6 results:
Got 5 connector lines
Status of connector 0 (Connector 0, SCSI Channel RAID Mode): Ok, state: Ready
Status of connector 1 (Connector 1, SCSI Channel RAID Mode): Ok, state: Ready

Checking Batteries on Controller 0:

–CMD7–: /usr/bin/omreport storage battery controller=0 -fmt ssv
Battery 0 on Controller PERC 4e/Di (Embedded)

Controller PERC 4e/Di (Slot Embedded)

ID;Status;Name;State;Recharge Count;Max Recharge Count;Predicted Capacity Status;Learn State;Next Learn Time;Maximum Learn Delay
0;Ok;Battery 0;Ready;1;1100;Not Applicable;Not Applicable;Not Applicable;Not Applicable

–CMD7 results:
Got 6 battery lines
Status of battery 0: Ok, state: Ready

Result: 0
STORAGE: OK [ Ctrl 0 (PERC 4e/Di is Non-Critical (Degraded: firmware mismatch: running: 521S, required: 522D)) ]