Build precise queries to find exactly what you need
Press ESC to close
Your review has been submitted and is pending approval.
This plugin checks sensors (temperature, voltage and fans) and overall health of IBM servers using the Remote Supervisor Adapter II (RSA2).
Current Version
0.0.2
Last Release Date
2010-08-24
Owner
Ulric Eriksson
Compatible With
Examples:
check_snmp_ibm_rsa2.sh -H 1.2.3.4 -C community -T health Health status: Normal|
check_snmp_ibm_rsa2.sh -H 1.2.3.4 -C community -T temperature System Ambient = 15.00 |Temperature5=15.00;;;;
check_snmp_ibm_rsa2.sh -H 1.2.3.4 -C community -T voltage Volt1 = 5.16 (limits [4.38,5.61]) Volt2 = 3.30 (limits [3.02,3.55]) Volt3 = 12.21 (limits [10.57,13.34]) |Voltage1=5.16;;;; Voltage2=3.30;;;; Voltage3=12.21;;;;
check_snmp_ibm_rsa2.sh -H 1.2.3.4 -C community -T fans Fan3 = 43% Fan4 = 34% Fan5 = 41% Fan6 = 32% Fan7 = 40% Fan8 = 32% Fan9 = 62% Fan10 = 56% Fan11 = 61% Fan12 = 55% |Fan3=43%;;;; Fan4=34%;;;; Fan5=41%;;;; Fan6=32%;;;; Fan7=40%;;;; Fan8=32%;;;; Fan9=62%;;;; Fan10=56%;;;; Fan11=61%;;;; Fan12=55%;;;;
Hallo i have IBM System x3650 [7979KPG], it has RSA2, but i don't get this plugin work, snmp is enabled from server side. from cli im getting Timeout: No Response from 192.168.0.3 Health status: Unknown|. any chance to raise time out level ? or what i can else try. R.
If you use snmpwalk from the command line, do you get any reply from the server?
You must be logged in to submit a review.
To:
From: