Build precise queries to find exactly what you need
Press ESC to close
Your review has been submitted and is pending approval.
This plugin checks sensors (psu, temperature, fans et al) and overall health of SAN switches that understand the Fibre Alliance MIB. There is a long list of companies behind that MIB; I have tested the script with switches from Brocade and Qlogic.
Current Version
0.0.3
Last Release Date
2010-08-18
Owner
Ulric Eriksson
Compatible With
Examples:
check_fibrealliance.sh -H 1.2.3.4 -C community -T status Overall unit status: OK Product: "QLogic(R) 4Gb Fibre Channel Switch Module for IBM BladeCenter(R)" Serial number: "11S26R0883ZK15TL67G529"
check_fibrealliance.sh -H 1.2.3.4 -C community -T sensors "Power supply 1 Status" = "Good" "Temperature Status" = "Normal" "Temperature Sensor 1 Value" = "27 degrees C"
Like a charm! For 249824E Express IBM System Storage SAN24B (what is Brocade 300 SAN switch)
Plugin works fine out of the box on EMC Brocade 5300, but it would be nice to get some performance data out of it so we can get some graphs. Also for serial number I get 'None'. I'll see if I can find the oid for it.
Tested on EMC Clariion SAN Switch & below is the result. ./check_fiberalliance.sh -H 10.0.64.214 -C public -T status Overall unit status: OK Product: "Fibre Channel Switch." Serial number: "6YFR34D1" ./check_fiberalliance.sh -H 10.0.64.214 -C public -T sensors TEMP #1" = type 3 is OK, value is 27" TEMP #2" = type 3 is OK, value is 29" " FAN #1" = type 4 is OK, value is 4129" " FAN #2" = type 4 is OK, value is 4129" " FAN #3" = type 4 is OK, value is 4129" " Power Supply #1" = type 5 is OK, value is 1" Nishith N.Vyas
!!!!!!!!!! Very GOOOOOD!
Exactly what I needed! Really awesome! Registered just to thank you!
Great plugin. Works great with my HP StoragWorks MSA 2324fc SAN and HP FiberChannel switches.
You must be logged in to submit a review.
To:
From: