Build precise queries to find exactly what you need
Press ESC to close
Your review has been submitted and is pending approval.
This script monitors the temperature of a Cisco catalyst via SNMP.
Current Version
1.0
Last Release Date
2010-08-31
Owner
Martin Scharm
Website
https://binfalse.de/software/monitoring/check_catalyst_temp-pl/
Download URL
https://binfalse.de/wp-content/uploads/2010/08/check_catalyst_temp.pl
License
GPL
Compatible With
It requests some data of a catalyst via SNMP to analyze them and notifies you via Nagios if the switch is getting to hot.
This script should be called with <code>-s [SWITCHIP], -C [COMMUNITYSTRING], -w [WARNLEVEL]</code> and <code>-c [CRITLEVEL]</code>. For more information just run it with <code>-h</code>.
Tested with different IOS versions and SNMP protocol version 2c. If you want to use a different SNMP protocol version, just modify the Net::SNMP->session(...) call.
To learn how to enable SNMP in your catalyst’s IOS and more informations at <a href="https://binfalse.de/software/nagios/check_catalyst_temp-pl/">https://binfalse.de</a>
Works perfectly on my 4507R-E (11 sensors!) and multiple 3750X stacks. Does not work on 2960G or 2950 - probably no sensor.
hi, tested on cisco catalyst 2960s (stacked) and it works perfectly ./check_cisco_temp.pl -s XXXXXX -C public -w 40 -c 50 OK: SW#2, Sensor#1, GREEN : 36 Grad C normal! SW#1, Sensor#1, GREEN : 36 Grad C normal!
You must be logged in to submit a review.
To:
From: