Directory

hello
thank you for creating this plugin.

i tested the plugin on a ibm x3550 M4 and i get a critical alert stating :
IPMI Status : Critical [DASD Backplane 2 = Critical]

ibm says :
Drive drive has reported a fault. This event must be cleared manually.

http://pic.dhe.ibm.com/infocenter/director/v5r2/index.jsp?topic=/diricinfo_5.20/fqm0_r_events_cim_system.html

i cleared all events in the megaraidcli but still have the message.

ipmimonitoring command says
Dasd backplane 2 entity presence critical , entity Absent

i do not see other events in the ibm managment interface. And there is no alert led

do you have some clues?

Regards

i just tested it sucessfully with a DS3400.

SMCli can be downloaded here :
http://www-933.ibm.com/support/fixcentral/swg/selectFixes?parent=ibm/Storage_Disk&product=ibm/Storage_Disk/DS3400&release=All&platform=All&function=all

The script do not bother of clock synchronisation , it reports only the status.

Here a sample output:

./check_IBM_DS_health.sh -a 10.0.0.1
The controller clocks in the storage subsystem are out of synchronization with the storage management station. Controller in Slot A: Mon Nov 21 22:29:53 CET

2011 Controller in Slot B: Mon Nov 21 22:27:57 CET 2011 Storage Management Station: Mon Nov 21 13:41:00 CET 2011 Storage Subsystem health status = optimal.
OK

here are recomandations for beginners :

- the ssh passwordless login must be done with user admin : eg ssh admin@cluster-ip
then the security check will be done with user provided in private key

- list your disk groups with command : svcinfo lsmdiskgrp
- the script require to have all parameters set to function. for example :
./check_svc_mdiskgrp.pl -cluster 192.168.1.1 -mdiskgrp B44-SAS -w 90 -c 99
sample output :
OK - B44-SAS 'Usage %' = 95.65; OK - B44-SAS 'Capacity' = 1672.75; OK - B44-SAS 'free Capacity' 72.75; OK - B44-SAS 'used Capacity' 1600.00; OK - B44-SAS 'real Capacity' 1600.00; OK - B44-SAS 'virtual Capacity' 1600.00|'Usage_%'=95.65;98;99;;'Capacity'=1672.75;'free_Capacity'=72.75;'used_Capacity'=1600.00;'real_Capacity=1600.00;'virtual_Capacity'=1600.00

hello ,
i get this error and i already have installed net-snmp modules

./check_snmp_isl_ciscoMDS9k-v1.1.pl -H 10.250.0.13 -C public
Can't locate object method "new" via package "SNMP::Session" (perhaps you forgot to load "SNMP::Session"?) at ./check_snmp_isl_ciscoMDS9k-v1.1.pl line 128.

same error here but i suspect a perl library update to have it broken because it worked before.
here the verbose log i get on a cisco server

20110824 09:53:36 Connection to https://10.47.5.251
20110824 09:53:36 Check classe OMC_SMASHFirmwareIdentity
20110824 09:53:36 Element Name = System BIOS
20110824 09:53:36 VersionString = C200.1.3.1c.0.021920110242
20110824 09:53:36 Check classe CIM_Chassis
20110824 09:53:37 Element Name = Chassis
20110824 09:53:37 Manufacturer = Cisco Systems Inc
20110824 09:53:37 SerialNumber = QCI1424A0WS
20110824 09:53:37 Model = R210-2121605W
20110824 09:53:37 Element Op Status = 0
20110824 09:53:37 Check classe CIM_Card
20110824 09:53:37 Element Name = Server Blade
20110824 09:53:37 SerialNumber = QCI1423A2CW
20110824 09:53:37 Element Op Status = 0
20110824 09:53:37 Check classe CIM_ComputerSystem
20110824 09:53:38 Element Name = System Board 7:0
20110824 09:53:38 Element Op Status = 0
20110824 09:53:38 Element Name = System Board 7:24
20110824 09:53:38 Element Op Status = 0
20110824 09:53:38 Element Name = System Board 7:29
20110824 09:53:38 Element Op Status = 0
20110824 09:53:38 Element Name = System Board 7:30
20110824 09:53:38 Element Op Status = 0
20110824 09:53:38 Element Name = System Board 7:31
20110824 09:53:38 Element Op Status = 0
20110824 09:53:38 Element Name = System Board 7:32
20110824 09:53:38 Element Op Status = 0
20110824 09:53:38 Element Name = System Board 7:33
20110824 09:53:38 Element Op Status = 0
20110824 09:53:38 Element Name = Add-in Card 11:0
20110824 09:53:38 Element Op Status = 0
20110824 09:53:38 Element Name = Add-in Card 11:1
20110824 09:53:38 Element Op Status = 0
20110824 09:53:38 Element Name = esx01.sab.be
20110824 09:53:38 Element Name = Hardware Management Controller (Node 0)
20110824 09:53:38 Element Op Status = 0
20110824 09:53:38 Element Name = Controller 0 (LSI MegaRAID SAS 9261-8i)
20110824 09:53:38 Element Op Status = 2
20110824 09:53:38 Check classe CIM_NumericSensor
Traceback (most recent call last):
File "check_esxi_hardware.py", line 493, in ?
instance_list = wbemclient.EnumerateInstances(classe)
File "/usr/lib/python2.4/site-packages/pywbem/cim_operations.py", line 403, in EnumerateInstances
ClassName = CIMClassName(ClassName),
File "/usr/lib/python2.4/site-packages/pywbem/cim_operations.py", line 178, in imethodcall
reply_dom = minidom.parseString(resp_xml)
File "/usr/lib/python2.4/site-packages/_xmlplus/dom/minidom.py", line 1925, in parseString
return expatbuilder.parseString(string)
File "/usr/lib/python2.4/site-packages/_xmlplus/dom/expatbuilder.py", line 942, in parseString
return builder.parseString(string)
File "/usr/lib/python2.4/site-packages/_xmlplus/dom/expatbuilder.py", line 223, in parseString
parser.Parse(string, True)
xml.parsers.expat.ExpatError: not well-formed (invalid token): line 2759, column 7